Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUDP01FLSS6 > Parts

KUDP01FLSS6 KitchenAid Dishwasher - Parts

All parts for the KitchenAid Dishwasher KUDP01FLSS6

Below is a list of all parts for the KitchenAid Dishwasher KUDP01FLSS6. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUDP01FLSS6
1-14 of 194
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.53

Door Balance Link Kit

This part is a door balance link kit, also sometimes known as door cable or door spring cable kit, that helps support the door as it opens and closes by connecting to the dishwashe...

$47.68

Silverware Basket

This is a basket for washing flatware or silverware in your dishwasher.

$11.43

Mounting Bracket

The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher f...

$26.28

Tine Row

The tine row on your dishwasher rack divides the rack into columns to keep your kitchen items in place during the washing cycle. If you notice that one or more of the tines on your current tine row is damaged, you should consider replacing it. This product is made of gray plastic and is approximately 21 inches in length. This tine row contains 11 straight tines and 1 curved tine. This product is sold individually. Many of our customers have rated this repair as very easy. To complete this repair, simply remove the old tine row and replace it with the new one.

$18.58

Stationary Wheel and Mount

Sold individually.

$24.21

Upper Wash Arm Kit

This part contains the mounting clips and helps distribute water from the top of the dishwasher tub.

$25.95

Chopper Assembly

This chopper assembly, or dishwasher drain food chopper, chops food particles into small pieces to prevent the dishwasher pump from clogging. If your dishwasher is making grinding,...

$55.07

Detergent and Rinse Aid Dispenser

This part releases the detergent and rinse aid into the dishwasher.

$4.89

Rubber Washer

The rubber washer is a part which is specific to dishwashers and should not be substituted by a similar part. It works with the heating element to seal the receptacle opening where...

$136.44

Circulation Pump and Motor

The circulation pump and motor is located near the bottom of the dishwasher. The part functions by spinning the impeller of the circulation pump, which is used to move the water through the spray arms during the wash cycle. Before you begin this repair, it is recommended that you pull your dishwasher out of the cabinet, so you can tip the dishwasher to one side and gain better access to the circulation pump and motor. Be sure to disconnect the power source and the water source to the dishwasher before you begin this repair. To complete this repair you will need a 1/4 inch nut driver and a 3/8 inch nut driver.

$7.00

Spray Arm Seal

This seal is located between the spray arm and the water feed tube.

$19.56

Door Balance Spring

This dishwasher door spring is sold individually. It is recommended if you are replacing one side, to replace both.

$16.56

Fuse Kit

When replacing these fuses the wire harness must be replaced as well. It is located in the control panel. The harness is included with this part now.

$127.14

Lower Dishrack

Dishrack ONLY.

All Parts for the KUDP01FLSS6
1-14 of 194