Models > KUDP01FLSS3 > Parts

KUDP01FLSS3 KitchenAid Dishwasher - Parts

All parts for the KitchenAid Dishwasher KUDP01FLSS3

Below is a list of all parts for the KitchenAid Dishwasher KUDP01FLSS3. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUDP01FLSS3
57-70 of 203
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$25.81

Inlet Fill Hose

$55.57

Accumulator and Filter

$24.30

Spray Arm - Middle

$5.00

Touch-Up Paint - 1/2oz. - Biscuit

$2.70

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$17.21

Float Switch

Water that fills your dishwasher lifts the float. When it reaches a certain level, the float triggers this float switch to shut off, thereby shutting off the flow of water into the dishwasher.

$24.44

Dishrack Track Stop

This gray dishrack track stop is located on the upper dishrack track. It refrains the upper dishrack from pulling out too far.

$11.31

Power Cord Kit

$5.95

CLAMP

$196.91

Heater Element and Electronic Control

This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher. This part is for stainless steel tubs.

$181.23

Circulation Pump and Motor Assembly

The drain pump ejects the water from the dishwasher. There is a small port for the thermistor. This assembly includes the sump housing, motor, impeller, shaft seal, volute and o-...

$46.93

Access Panel - Black

$37.01

Water Inlet

This is connected to the water valve, is located on the side of your tub and allows water to enter your dishwasher. ***Note: This part does not include the inlet gasket - must ord...

$24.09

Volute with Seal

This part forces the water from the pump to the sump area for discharge.

All Parts for the KUDP01FLSS3
57-70 of 203