All Installation Instructions for KitchenAid Dishwasher KUDP01FLSS3

Door not working. Heard a pop and door fell.

Your website was brilliant with the u tube video on how to fix it. Got the parts quickly and at half the price of Kitchenaid. And you included the white plastic pulley part for both sides with the string parts that holds the door up. Turns out that was what was broken on both sides. This is my first review ever and you get an A plus!

Parts Used:

Door Balance Link Kit

Randi from New York, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)

Was this instruction helpful to you?

Thank you for voting!

Diswasher broken

Dishwasher was broken. I bought a part. I put the part in the dishwasher. The diswahser was then fixed. Wheeee!

Parts Used:

Tine/Flexrow Retainer

Tedd from Grapevine, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Silverware basket had holes in the bottom.

Replaced the basket which required no tools.

Parts Used:

Dishwasher Silverware Basket

Ronald from Foley, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Silverware basket base had melted parts due to heat during drying

Took out the old and popped in the new! Literally took less than a minute. Exact match. Very happy!! Now kids can help load dishwasher without utensils falling into the bottom! Small thing but less stress Plus..... shipping was soooo fast. Great experience.

Parts Used:

Dishwasher Silverware Basket

Sharon from Aurora, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Hole in filler hose

twist filler hose assembly to the side and slide hose in. place clamps on hose and attach to water supply and valve.

Parts Used:

Inlet Fill Hose

Gordon from Davidsonville, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

Thank you for voting!

We had a leak which caused rust and wear on the kick plate

Easy Installation and repair as good as new. Parts ordered via schematic of dishwasher--accurate and easily done. Would recommend partselect to anyone.

Parts Used:

SHIELD

ACCESS PANEL (BLACK)

SHIELD

Kickplate - Black

Douglas from Kingwood, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

Thank you for voting!

top rack not cleaning well

I removed the racks. I removed the spray arm then the lower spray arm and found the center support hud was stripped in the center. Then I installed the new parts and it is cleaning better.

Parts Used:

Lower Spray Arm

Lower Spray Arm Support/Hub

Spray Arm Seal

Leonard from Chapmansboro, TN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

Thank you for voting!

Leaking drain hose

Turned off water to dishwasher and disconnected hot water and drain hoses. Removed to side screws and kick panel and pulled dishwasher from under counter. Removed old drain hose and fed the new one over to the drain. Reconnected the hot water and new drain hose. Pushed dishwasher under cabinet and screwed to cabinets. Ran the dishwasher and checked for leaks. Replaced kick panel.

Parts Used:

Drain Hose

David from Ellicott City, MD
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)

Was this instruction helpful to you?

Thank you for voting!

Balance cord failed on left side of dishwaser

Installing the new cord assembly took only 3 minutes after getting the built-in dishwasher out from under the counter. That was a thirty minute job. There was no way to slip my arm in to reconnect the coil balance spring. Thankfully the original installer supplied enough electrical and water line that did not have to disconnected.

Parts Used:

Door Balance Link Kit

M.R. from Newbury, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Door would not stay in the upright position and would fall if not latched.

I removed the unit from under the counter and replaced the plastic and connecting cords to the springs, a ten minute job. The cord on the dishwasher is not made to take the strain and will break after some years of use. The kit came with all parts to repair the problem and there is a video on the site if you have a problem.

Parts Used:

Door Balance Link Kit

Richard M. from Aiken, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

washer quit mid cycle. water still in machine.

Removed top cover on door ( 6 Screwsw ) Removed cover over electronic board. Tested fuse with tester and had no current flowing through fuse. Easy test!!! Video was a big help. Replaced fuse and washer ran great and still is.

Parts Used:

Fuse Kit

karl from monticello, IN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

The hose had a slit in it.

I removed old hose and replaced it with a new one and reinstalled the dishwasher.

Parts Used:

Inlet Fill Hose

Larry from Sarasota, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)

Was this instruction helpful to you?

Thank you for voting!

Dishwasher door wouldn't stay partially opened

Very easy repair. Just used a cordless drill driver to remove the nut on each pulley, replaced them and that was it. One of the easiest repairs I have ever done. Had to pull the dishwasher our far enough to reach the pulley on each side. Part only goes in one way so you can't screw that up. :^) Tip: Used a lockgrip plier to pull on the spring while I attached the cord to it. Not required but made it easier.

Parts Used:

Door Balance Link Kit