Models > KUDM01TJBL0 > Parts

KUDM01TJBL0 KitchenAid Dishwasher - Parts

All parts for the KitchenAid Dishwasher KUDM01TJBL0

Below is a list of all parts for the KitchenAid Dishwasher KUDM01TJBL0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUDM01TJBL0
1-14 of 178
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Balance Link Kit

This kit includes 2 door balance links and 2 door balance mounts with wheels.


Stationary Wheel and Mount

Sold individually.


Mounting Bracket

Sold individually.


Door Gasket with Strike - Black

The gasket provides a seal between the tub and the door. The door strike serves as a mechanical actuator for door switch operation and provides door tension for proper seal.


Upper Wash Arm Kit

This part contains the mounting clips and helps distribute water from the top of the dishwasher tub.


Chopper Assembly

This chopper assembly chops/minces the food particles to prevent clogging of the dishwasher pump.


Door Release Spring

This spring is located in the door section. Sold individually.


Door Handle

NOTE: This part is no longer available in white or biscuit.


Detergent and Rinse Aid Dispenser

This part releases the detergent and rinse aid into the dishwasher.


Water Inlet Valve

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve will open and close according to the desired amount of water needed.


Lower Dishrack

Dishrack ONLY.


Fuse Kit

When replacing these fuses the wire harness must be replaced as well. It is located in the control panel. The harness is included with this part now.


Circulation Pump and Motor

The part functions by spinning the impeller of the circulation pump, which is used to move the water through the spray arms during the wash cycle.


Hose Clamp

All Parts for the KUDM01TJBL0
1-14 of 178