KUDI24SEBL1 KitchenAid Dishwasher - Instructions

This was so easy. I used a screw driver to remove the old arm and mount. The new arm and mount fit together with just one phillips head screw. This then "snapped" into place on the upper dishwasher rack. So glad I only spent the $40 on parts and shipping and did this myself versus the $175 price the repair man was going to charge.

watched the utube viedo and it gave all you needed to know

First off the sitemade it extremly easy to dial into the very part that is broke with the detailed print views. This too saved me money as it was a 5$ part. removing the broken part was easy and was easily seen in the detailed parts views. The part (like many parts for old appliances) was slightly different but still mounted to the upper racks wire frame just with clips and not a screw clamp mount. All in all 10 mintues to find and order part and 10-15 minutes to install. Dishwasher works great!

Pulled the old seal out and inserted the new one. Very simple and fast. Dishwasher no longer leaks.

ordered new and replace very easy -

I followed the on line video instructions and the repair was completed with a hitch. The seal did not display the 'white stripe', but the enclosed illustration cleared up any question I had about proper insertion. The part arrived within 24 hrs of shipment! I will use Parts Select exclusively in the future! No more big bucks to have a Sears guy simply plug in a new part.

removed clips on old shelving and slide it off the brackets then slid the new shelf on and lock it with the clips. That was it.....

Removed brace that holds arm to top tray. Replaced it with new room and secured with existing connector to bottom of top dish tray. Parts were correct and everything went well.

My dishwasher was not getting the dishes clean. I decided the spray arm may not be moving freely. I tried spinning it a few times and although it would spin a little, it was wobbly. I removed it and, by comparing with my owners manual, discovered the Spray Arm Seal was completely missing. I do not know why. Regardless, I found one on PartsDirect.com. I also ordered the Wash Arm Bearing Ring b/c I figured the old one might be worn. Wow! I'm glad I did. When I got the new one and compared the two you could really tell a difference. After installing these two parts, the dishwasher works like new again. This was much cheaper than calling a repairman or buying a new dishwasher!

I followed the excellent video which explained exactly how to change the middle spray arm. It was the easiest 15 minute fix! Thanks for the video.

Removed the existing pieces and replaced with the new -- it was that easy, I do not think it even took ten minutes! The parts were delivered in record time and that was greatly appreciated. Thank you!

snapped the wheel into place. it took longer to open the package than to snap it into place.

Hang with me on this. Gas burner on 10 year old dryer went out. I'm not touching that. Creepy repair guy that made wife really nervous paid a visit, ordered parts, cancelled appointments, and days later returned to finish up($140). In meantime, dishwasher started pooling on floor. Had guy look at that when back for the dryer. He ordered new door deal, and (days later) returned and installed that, But the pooling was only worse. That weekend I look at it myself. One pump housing screw (and a big piece of broken glass)was sitting on bottom of unit. Other housing screws were loose. The rubber outlet gasket/seal was sticking way out at missing screw. The obvious problem. Ordered new plastic spray arm and rubber gasket parts (cheap), which arrived faster than repair guy. In maybe 10 minutes I removed spray arm and other pump housing screws, was shocked by extent of wear on old parts, dropped the new rubber seal into its slot, and replaced the lower spray arm using new plastic seal and ring parts. Easy. Fixed. Dishwasher works better than ever. And I even have (an expensive)new seal on dishwasher door. Grrr. Easy part identification, helpful videos, super fast shipping. PartSelect is where I go first from now on.

Dishwasher is 10+ years old. It has given no problems over the years. The middle spray arm tube wore out, it had a hole one inch in size. The wash arm bearing just wore out. The repairs went easy there were on problems at all. Dishes now come out nice and clean.

Unscrewed the broken nut and replace the nut with the new one. Even I could do it. Great response from Part Select the part came in the mail quickly. Love the Video on How to replace it. Good Job