Models > KUDI230B0 > Parts

KUDI230B0 KitchenAid Dishwasher - Parts

All parts for the KitchenAid Dishwasher KUDI230B0

Below is a list of all parts for the KitchenAid Dishwasher KUDI230B0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUDI230B0
29-42 of 269
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Switch Actuator Kit

This dishwasher door switch will shut your dishwasher off when the door is opened.


Door Spring

If customer has add-on wood panel doors, the heavy-duty springs are required. * It is recommended to replace both springs at the same time. *


Filter Screen

Located at the bottom of the dishwasher, this filter keeps large particles of food and foreign objects away from the pump.


Pump Housing Centering Tool




Rack Roller Retainer Kit

This upper rack roller retainer kit consists of four complete sets. Each set contains five pieces. Each set screws into the wall of your dishwasher and together they make up the assembly that the dishrack and its rollers glide on.


Touch-up Paint - Almond

Water Inlet Valve

This water inlet valve has attaching solenoids on the valve that open and close according to the desired amount of water needed.


Upper Track End Cap

This part goes at the end of the rail to stop the dishrack from falling out.



Also known as a washer.



Sold individually.


Float Stem Kit

This kit comes with the float stem, gasket and switch.


Dishwasher Float

This dishwasher float is used for overfill protection. ***UPDATE: This part no longer comes with the cork seal on the shaft.


Lower Rack Bumper - Blue

Keeps the lower rack from sliding all the way out.

All Parts for the KUDI230B0
29-42 of 269