The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
This part is a door balance link kit, also sometimes known as door cable or door spring cable kit, that helps support the door as it opens and closes by connecting to the dishwasher door hinges. The k...
This upper dish rack wheel mount can be used on either side of your dish rack. It is sold individually. The part includes the wheel and support, which attaches to the dish rack and allows it to slide in and out easily.
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking,...
This is a door seal, but you may also know it as a door gasket and it is a part for your dishwasher. It provides a leak proof seal between the tub and the door of your appliance. You will need to repl...
The rubber washer is a part which is specific to dishwashers and should not be substituted by a similar part. It works with the heating element to seal the receptacle opening where the heating element...
This part releases the detergent and rinse aid into the dishwasher.
$90.08
In Stock
Questions And Answers for KUDI01ILBL6
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kenneth
November 7, 2019
Cancel and normal lights are blinking and the dishwasher is not completely drained.
For model number KUD1011LBL6
Hi Kenneth,
Thank you for your question. If the dishwasher is not completely draining and the lights on the control panel are blinking, try unplugging the dishwasher to see if this resets the issue. Your dishwasher should have a tech sheet, that you may reference as well to resolve certain issues that may happen to it. The tech sheet is found normally behind the toe panel or kickplate on your dishwasher. If this is related to the dishwasher not draining correctly, there are some parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=KUDI01ILBL6&mfgModelNum=&fkMfgID=3&ost=KUD1011LBL6&ModelMasterID=6330&PID=23. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Leila
December 3, 2023
Dishwasher makes a buzzing sound when running.
For model number KUDI01ILBL6
Hello Leila, thank you for reaching out. According to our research, we would recommend checking the spray arm to ensure that it is not clogged. If the issue still occurs, you may need to check the circulation pump and motor, part number PS11757388, to fix the issue. We hope this helps!
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough.
This wheel mount broke from normal use and made the upper dish rack disconnect from the sliding arm that extends it outside the dishwasher body so that you can fill it. The part was delivered quickly and was easy to install using just a screwdriver to loosen the retainer clip on the end of the extension slide. Once the retainer clip was r
... Read moreemoved, the new part was slid into place and clipped onto the rack. The install was complete.
I had to fiddle with the mount a bit to get it on the rack properly. Then I pulled back slightly on the inner part of the end piece of the track while also pulling the top of the piece back and released the inner tip of the piece, allowing the end piece to be removed. I placed the new wheel in the track and replaced the end piece.
... Read more Super easy and a small fraction of what a repairman had told me the part would cost.