Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUDI01FLSS6 > Parts

KUDI01FLSS6 KitchenAid Dishwasher - Parts

All parts for the KitchenAid Dishwasher KUDI01FLSS6

Below is a list of all parts for the KitchenAid Dishwasher KUDI01FLSS6. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUDI01FLSS6
15-28 of 185
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$127.14

Lower Dishrack

Dishrack ONLY.

$39.62

Water Inlet Valve

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve will open and close according to the desired amount of water needed.

$14.21

3rd Level Wash Spinner Kit

This part is the top spinner located at the very top of the wash tub. Water passes through all the spinners causing it to dispense all around the tub.

$3.42

Spray Arm Seal

Also known as a wash arm seal.

$18.32

High Limit Thermostat

This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating eleme

$35.87

Seal

This seal is attached to the inner cabinet to reduce noise.

$6.13

Upper Wheel Gasket

Sold individually.

$57.48

Door Seal

This gasket comes with the adhesive.

$6.28

Screw

Sold individually.

$53.97

Door Latch

As per the factory, this is an updated latch and you will need to order the strike as well - as per your model number.

$13.01

Tine Retainer

This retainer holds the removable tines in a dishwasher. This part is sold individually.

$3.02

Cover Screw

Sold individually.

$29.33

Strike Plate

This part is mounted on the top of the dishwasher.

$3.02

Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.

All Parts for the KUDI01FLSS6
15-28 of 185