Models > KUDG25SHAL1

KUDG25SHAL1 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDG25SHAL1

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDG25SHAL1, or you can search by name or part description. You can also find your part by where it is located on the KUDG25SHAL1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDG25SHAL1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$26.57

Middle Spray Arm Kit

This kit has been redesigned. The supply tube is now one piece. This spray arm kit comes with an upper spray arm, holder, water supply tube and a screw. This kit does NOT include...

$3.81

Upper Spray Arm Mount

**Please note: This is a redesigned part. The top mounting clip and screw are no longer needed.

$3.76

Wash Arm Bearing Ring

This part will fit between the newer type lower wash arm and the wash arm retainer nut of your dishwasher.

$3.61

Spray Arm Seal

This white under spray arm bearing ring is designed with the split. This is not a defective or damaged item.

$3.81

Wash Arm Retainer Nut

Use this part to secure the lower spray arm of your dishwasher.

$33.52

Drain and Wash Impeller Kit

This dishwasher drain and wash impeller kit comes with both the drain and wash impeller, gaskets, chopper and installation screw. This part helps stop your dishwasher from leaking and helps with the proper draining of the dishwasher.

$3.96

Rubber Washer

Sold individually. Used with the heating element.

$24.19

Lower Door Seal Kit

NOTE: This part requires a silicon sealant for installation.

$151.37

Lower Dishrack Kit

This kit includes 4 roller sets, tines and fasteners.

$3.82

USE WPL 8533889

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dishes not clean and lower wash arm wobbled.

  • Customer: James from Jacksonville FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 476 of 475 people found this instruction helpful
Completely removed lower wash arm and replaced bearing ring and seal. read more

Not Cleaning lightly soiled items.

  • Customer: Dennis from Cromwell CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 368 of 370 people found this instruction helpful
Removed spray arm thumb nut. Removed spray arm. replaced worn and broken earings and re-assembled in reverse order. Would have done the repair a lot sooner if I had known that PartsSelect was just a few miles up the highway. read more

Water washing out under front door onto floor

  • Customer: Kent from Matthews NC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 144 of 214 people found this instruction helpful
The plastic parts on this spray arm assembly wear with time and the rotation wobble effect creates a wave action in the pool of water at the bottom of the dishwasher. This waves the water onto the front door and forces a leak outside the unit. Replace the lower arm assembly, washer, bearing and nut. They all wear. Also remember to tighten the screws on to... read more