Models > KUDG23HBWH0

KUDG23HBWH0 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDG23HBWH0

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDG23HBWH0, or you can search by name or part description. You can also find your part by where it is located on the KUDG23HBWH0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDG23HBWH0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.67

Single Lower Roller Axle

This is the axle only. Wheel is sold separately.

$2.84

Single Roller Wheel

Sold Individually.

$33.52

Drain and Wash Impeller Kit

This dishwasher drain and wash impeller kit comes with both the drain and wash impeller, gaskets, chopper and installation screw. This part helps stop your dishwasher from leaking...

$17.75

Rubber Water Delivery Tube

This rubber tube carries water from the upper spray arm manifold to the receiver of a dishwasher. This thin walled tube can become brittle over time and crack. If it does, it will lead to poor cleaning quality of the dishes on the upper rack, and you will need to replace it.

$2.70

Screw

This screw is sold individually.

$2.70

Cover Screw

Sold individually.

$25.64

Drain Check Valve with O-Ring

$2.70

Hose Clamp

This hose clamp is sold individually.

$133.87

Lower Dishrack Only

This lower dishrack does not include the rollers, axles or corner splash guards. The color of the rack is no longer blue, but light ice gray.

$3.86

Touch-Up Paint - White

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

replace roller axles, wheels and silverware basket

  • Customer: William from Washington DC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 362 of 364 people found this instruction helpful
...popped out the old in with the new...could not have been easier! read more

Dishwasher Not Draining

  • Customer: Lewis from Portsmouth NH
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 71 of 100 people found this instruction helpful
Ordered both drain & wash impeller kit and the drain check valve with o-ring. Decided to test the cheaper drain check valve first. Pulled dishwasher out from wall & adjacent cabinetry; removed drain hose from disposer and drained as much water as possible; "jacked" side of dishwasher to gain access to drain hose and drain check valve; used pliers to remove ... read more

leaking from tub above motor

  • Customer: Daniel from Sarasota FL
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 60 of 89 people found this instruction helpful
Disconnect unit and remove from under counter. remove lower spray arm, tip over dishwasher on it's back, diconnect wires from motor , unscrew drain fitting rotate motor mounts to and lift pump and motor assembly up and out from inside the dishwasher. thoughly clean all parts during pump disassembly( under running water and a toothbrush works well) . Lookin... read more