Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUDE60FXSS5

KUDE60FXSS5 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDE60FXSS5

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDE60FXSS5, or you can search by name or part description. You can also find your part by where it is located on the KUDE60FXSS5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDE60FXSS5 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.66

Door Balance Link Kit

This kit includes 2 door balance links and 2 door balance mounts with wheels.

$25.81

Tine Row

Sold individually.

$28.59

Door Latch - Black

NOTE: This part has been redesigned, it may appear different but will still function the same as the original.

$21.68

Tine Row - Kit of 2

$7.22

Touch-Up Paint - White

18ml

$12.72

Drain Hose

This drain hose is 6 and 1/2 feet.

$10.76

Side Mounting Bracket Kit

This mounting kit can be used on solid surface countertops.

$45.79

Heating Element

The heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.

$142.41

Upper Dishrack

Dishrack ONLY. Wheels not included.

$78.60

Motor

Also know as a diverter valve.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replaced Hinge Link

  • Customer: Scott from Fort Lauderdale, FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 443 of 454 people found this instruction helpful
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough. read more

Door spring link broken

  • Customer: Sean from Ramona, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench (Adjustable)
  • 123 of 129 people found this instruction helpful
1. Open the dishwasher and remove the two plastic grommets about halfway down on either side of the opening. Then remove the two screws under the grommets.

2. Remove the kick plate under the door. May have to lower unit by turning the feet using the adjustable wrench.

3. Make sure you have enough slack in the water input line and electr... read more

The door would drop open when it was released

  • Customer: David from La Quinta, CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 96 of 98 people found this instruction helpful
This was the second time I had this problem so I knew the symptoms and remedy. The tools needed were two nut drivers a ¼” and 5/16” along with a flat pry bar and Phillips screw driver. I started by removing the lower front panel by removing the two ¼” screws on either side. The lower panel will lift up and then can be removed by pulling on the bottom. Th... read more