Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUDE60FVSS1

KUDE60FVSS1 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDE60FVSS1

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDE60FVSS1, or you can search by name or part description. You can also find your part by where it is located on the KUDE60FVSS1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDE60FVSS1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.05

Door Balance Link Kit

This kit includes 2 door balance links and 2 door balance mounts with wheels.

Order within the next 8 mins and your part ships today!
$40.19

Silverware Basket - Gray

This is a basket for washing flatware or silverware in your dishwasher. Note: This part has been updated by the manufacture, it may appear different but will still function the same.

Order within the next 8 mins and your part ships today!
$7.60

Tine Pivot

This part helps to hold the tine row in place on your dish rack.

Order within the next 8 mins and your part ships today!
$18.98

Bi-Metal Fuse

This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance. Also known as Thermal Fuse.

Order within the next 8 mins and your part ships today!
$9.84

Mounting Bracket

Sold individually.

Order within the next 8 mins and your part ships today!
$52.15

Water Inlet Valve

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

Order within the next 8 mins and your part ships today!
$15.31

Rinse Aid Cap

This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.

Order within the next 8 mins and your part ships today!
$14.09

Spinner Kit

This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.

Order within the next 8 mins and your part ships today!
$25.46

Tine Row

Sold individually.

Order within the next 8 mins and your part ships today!
$124.70

Lower Dishrack

Dishrack ONLY.

Order within the next 8 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replaced Hinge Link

  • Customer: Scott from Fort Lauderdale, FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 496 of 509 people found this instruction helpful
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough. read more

dishwasher not draining after wash cycle

  • Customer: Andrew from Alexandria, VA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 257 of 284 people found this instruction helpful
Caviat: The actual repair is less than 15 minutes, but I spent a lot of time playing with it before I figured out it was that easy and fast. You don't need to remove the dishwasher from the counter to do this. And it will probably help to look at the new part closely so you can understand where the retainer clip is to press it and release the old pump.
... read more

water leaking out of bottom of machine

  • Customer: MICHELLE from EDEN VALLEY, MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers, Wrench (Adjustable), Wrench set
  • 138 of 154 people found this instruction helpful
removes the 1 screw that held the old one in and removed the water lines the supply line with a adjustable wrench and the internal line had a hose clamp on it then i just went in reverse... read more