Models > KUDE48FXPA5

KUDE48FXPA5 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDE48FXPA5

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDE48FXPA5, or you can search by name or part description. You can also find your part by where it is located on the KUDE48FXPA5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDE48FXPA5 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.02

Door Balance Link Kit

This kit includes 2 door balance links and 2 door balance mounts with wheels.

Order within the next 6 hrs and your part ships today!
$19.95

Lower Dishrack Wheel

Sold individually. Each roller holds two wheels. There are four sets that attached to the lower rack.

Order within the next 6 hrs and your part ships today!
$6.82

Mounting Bracket

Sold individually.

Order within the next 6 hrs and your part ships today!
$5.55

Tine Pivot

This part helps to hold the tine row in place on your dish rack.

Order within the next 6 hrs and your part ships today!
$27.37

Positioner

Also known as rack adjuster. Sold individually.

Order within the next 6 hrs and your part ships today!
$20.15

Adjuster Clip

Sold individually.

Order within the next 6 hrs and your part ships today!
$24.31

Tine Row

Sold individually.

Order within the next 6 hrs and your part ships today!
$4.54

Rubber Washer

Sold individually. Used with the heating element.

Order within the next 6 hrs and your part ships today!
$2.70

Hose Clamp

Order within the next 6 hrs and your part ships today!
$4.61

Tine Clip

Sold individually. This is a no flip dishrack clip.

Order within the next 6 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replaced Hinge Link

  • Customer: Scott from Fort Lauderdale FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 372 of 381 people found this instruction helpful
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough. read more

Door spring link broken

  • Customer: Sean from Ramona CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 106 of 110 people found this instruction helpful
1. Open the dishwasher and remove the two plastic grommets about halfway down on either side of the opening. Then remove the two screws under the grommets.

2. Remove the kick plate under the door. May have to lower unit by turning the feet using the adjustable wrench.

3. Make sure you have enough slack in the water input line and electr... read more

The door would drop open when it was released

  • Customer: David from La Quinta CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 83 of 85 people found this instruction helpful
This was the second time I had this problem so I knew the symptoms and remedy. The tools needed were two nut drivers a ¼” and 5/16” along with a flat pry bar and Phillips screw driver. I started by removing the lower front panel by removing the two ¼” screws on either side. The lower panel will lift up and then can be removed by pulling on the bottom. Th... read more