Models > KUDE40FXSS3

KUDE40FXSS3 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDE40FXSS3

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDE40FXSS3, or you can search by name or part description. You can also find your part by where it is located on the KUDE40FXSS3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDE40FXSS3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$28.38

Rack Adjuster - Left or Right Side

This adjuster is used to change the height of the upper rack and can be used for either the left or the right size.

$19.16

Door Balance Link Kit

This kit includes 2 door balance links and 2 door balance mounts with wheels.

$21.09

Positioner

Also known as rack adjuster. Sold individually.

$6.78

Mounting Bracket

Sold individually.

$3.76

Tine Pivot

$22.74

Adjuster Clip

Sold individually.

$22.47

Lower Dishrack Wheel

Sold individually. Each roller holds two wheels. There are four sets that attached to the lower rack.

$3.82

STOP

$15.27

Spinner Kit

This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.

$26.20

Drawer Track

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replace rack adjusters - wheel were broken

  • Customer: Paul from Encinitas CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 457 of 590 people found this instruction helpful
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides together. Piece of cake read more

broken rollers on upper basket

  • Customer: Walton from Chittenango NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 444 of 692 people found this instruction helpful
I took the broken basket adjuster off and then attached the new one. It wasn't too difficult, however some removal instructions and re-install instructions( or just a picture supplied) would have been helpful. This isn't an issue for a mechanically inclined person, but would be a challenge for someone that isn't. Thanks. read more

Replaced Hinge Link

  • Customer: Scott from Fort Lauderdale FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 306 of 312 people found this instruction helpful
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough. read more