Models > KUDE40FXPA2

KUDE40FXPA2 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDE40FXPA2

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDE40FXPA2, or you can search by name or part description. You can also find your part by where it is located on the KUDE40FXPA2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDE40FXPA2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Rack Adjuster Kit - Left & Right Side

This part has been redesigned and now comes in a kit. This kit includes 2 adjuster assemblies, 1 left hand and 1 right hand actuator cover, 2 gray adjuster covers, and 2 gray adjus...


Door Balance Link Kit

This kit includes 2 door balance links and 2 door balance mounts with wheels.


Mounting Bracket

Sold individually.


Tine Pivot

This part helps to hold the tine row in place on your dish rack.



Also known as rack adjuster. Sold individually.


Rack Stop Clip

This part goes on the end of the rail to stop the dishrack from falling out.


Spinner Kit

This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.


Adjuster Clip

Sold individually.


Drawer Track


Tine Row

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replaced Hinge Link

  • Customer: Scott from Fort Lauderdale FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 388 of 399 people found this instruction helpful
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough. read more

dishwasher not draining after wash cycle

  • Customer: Andrew from Alexandria VA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 164 of 180 people found this instruction helpful
Caviat: The actual repair is less than 15 minutes, but I spent a lot of time playing with it before I figured out it was that easy and fast. You don't need to remove the dishwasher from the counter to do this. And it will probably help to look at the new part closely so you can understand where the retainer clip is to press it and release the old pump.
... read more

Door spring link broken

  • Customer: Sean from Ramona CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 109 of 113 people found this instruction helpful
1. Open the dishwasher and remove the two plastic grommets about halfway down on either side of the opening. Then remove the two screws under the grommets.

2. Remove the kick plate under the door. May have to lower unit by turning the feet using the adjustable wrench.

3. Make sure you have enough slack in the water input line and electr... read more