Models > KUDE20IXWH8

KUDE20IXWH8 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDE20IXWH8

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDE20IXWH8, or you can search by name or part description. You can also find your part by where it is located on the KUDE20IXWH8 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDE20IXWH8 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Balance Link Kit

This kit includes 2 door balance links and 2 door balance mounts with wheels.


Mounting Bracket

Sold individually.


Rack Stop Clip

This part goes on the end of the rail to stop the dishrack from falling out.



Also known as rack adjuster. Sold individually.


Spinner Kit

This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.


Adjuster Clip

Sold individually.


Lower Dishrack

Dishrack ONLY.


Drawer Track


Drain Pump - 120V 60Hz

The pump ejects the water from the unit.


Tine Row

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replace rack adjusters - wheel were broken

  • Customer: Paul from Encinitas CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 581 of 764 people found this instruction helpful
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides together. Piece of cake read more

Replaced Hinge Link

  • Customer: Scott from Fort Lauderdale FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 402 of 413 people found this instruction helpful
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough. read more

broken rollers on upper basket

  • Customer: Walton from Chittenango NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 513 of 780 people found this instruction helpful
I took the broken basket adjuster off and then attached the new one. It wasn't too difficult, however some removal instructions and re-install instructions( or just a picture supplied) would have been helpful. This isn't an issue for a mechanically inclined person, but would be a challenge for someone that isn't. Thanks. read more