Models > KUDB230Y2

KUDB230Y2 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDB230Y2

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDB230Y2, or you can search by name or part description. You can also find your part by where it is located on the KUDB230Y2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDB230Y2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Single Lower Roller Axle

This is the axle ONLY. Wheel is sold separately.


Single Roller Wheel

Sold Individually.


Drain and Wash Impeller Kit

This dishwasher drain and wash impeller kit comes with both the drain and wash impeller, gaskets, chopper and installation screw. This part helps stop your dishwasher from leaking...



This screw is sold individually.


Rubber Water Delivery Tube

This rubber tube carries water from the upper spray arm manifold to the receiver of a dishwasher. This thin walled tube can become brittle over time and crack. If it does, it will ...


Touch-Up Paint - White



Spray Paint - 12 oz. - White


Drain Check Valve with O-Ring

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.


Hose Clamp

This hose clamp is sold individually.


Mounting Bracket

This metallic mounting bracket comes with a screw for easy mounting.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

roller axels were broken and wheels missing

  • Customer: Robert from Chlemsford MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 462 of 462 people found this instruction helpful
pulled out the old broken axels and pushen in the new ones and then snapped in the wheels. read more

replace roller axles, wheels and silverware basket

  • Customer: William from Washington DC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 363 of 365 people found this instruction helpful
...popped out the old in with the new...could not have been easier! read more

Dishwasher Not Draining

  • Customer: Lewis from Portsmouth NH
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 120 of 161 people found this instruction helpful
Ordered both drain & wash impeller kit and the drain check valve with o-ring. Decided to test the cheaper drain check valve first. Pulled dishwasher out from wall & adjacent cabinetry; removed drain hose from disposer and drained as much water as possible; "jacked" side of dishwasher to gain access to drain hose and drain check valve; used pliers to remove ... read more