Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUDB22HT1

KUDB22HT1 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDB22HT1

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDB22HT1, or you can search by name or part description. You can also find your part by where it is located on the KUDB22HT1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDB22HT1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.20

Touch-Up Paint - White

18ml

$11.07

Spray Paint - 12 oz. - White

$19.44

Door Switch Actuator Kit

This dishwasher door switch will shut your dishwasher off when the door is opened.

$28.38

Rack Roller Retainer Kit

This upper rack roller retainer kit consists of four complete sets. Each set contains five pieces. Each set screws into the wall of your dishwasher and together they make up the assembly that the dishrack and its rollers glide on.

$31.21

Float Stem Kit

This kit comes with the float stem, gasket and switch.

$28.63

Dishwasher Float

This dishwasher float is used for overfill protection. ***UPDATE: This part no longer comes with the cork seal on the shaft.

$28.17

Upper Spray Arm Receiver

$20.81

Spray Paint - Surperior Black

This is a 12oz can of black spray paint.

$22.94

PRIMER

$92.67

Front Panel Insert Kit - Stainless Steel

This stainless steel front panel kit contains two pieces: the door panel and the kickplate panel.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

roller axels were broken and wheels missing

  • Customer: Robert from Chlemsford, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 463 of 463 people found this instruction helpful
pulled out the old broken axels and pushen in the new ones and then snapped in the wheels. read more

replace roller axles, wheels and silverware basket

  • Customer: William from Washington, DC
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 363 of 365 people found this instruction helpful
...popped out the old in with the new...could not have been easier! read more

Old wheels were going away 1 by 1

  • Customer: brett from newbury pk., CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 75 of 139 people found this instruction helpful
I took the dishtray outside to the patio and removed all the old wheels and axles. Sipped some coffee and then snapped on all the new axles and wheels. It now rolls like new even when full of dishes. I,m glad I found your website again! read more