Models > KUCS02FRPA0

KUCS02FRPA0 KitchenAid Trash Compactor - Overview

Get Parts and Repair Help for KUCS02FRPA0

If you know the trash compactor repair part you need, you can browse the list of all parts on the KUCS02FRPA0, or you can search by name or part description. You can also find your part by where it is located on the KUCS02FRPA0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your trash compactor. We’ve also included any installation videos we have for KUCS02FRPA0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$14.21

15" Paper Compactor Bags - 12 Pack

Moisture-resistant liner. Pre-cuffed.

$16.38

15" Compactor Bags - 15 Pack

These bags will fit most 15" rectangular compactors.

$40.74

Off-Switch Actuator Kit

This kit contains the normally closed switch, toe guard, template, 2 screws and actuator. NOTE:This part has been redesigned by the manufacturer but will still function the same a...

$26.14

Drive Gear Kit

This kit is used for trash compactors. It includes both gears, pin spring, C-ring, ram stop, and ram cam.

$1.95

Foot, Front - Single

Sold Individually.

$5.54

Touch-Up Paint - White

$9.06

Charcoal Filter

Sold individually.

$49.80

15" White Plastic Compactor Bags - 60 Pack

$29.75

Directional Switch

$2.70

SCREW

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Beware the "two screws, five minutes" repair stories!

  • Customer: Scott from Ventura CA
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set
  • 99 of 101 people found this instruction helpful
Needed a replacement actuator for KitchenAid trash compactor model KUCS03FTSS0. The part that broke is a small metal flange held in place by two screws. PartSelect.com clearly shows this part in the online exploded view of Container Parts. When I received the replacement order in the mail, I was surprised that it was not what I thought I had ordered (a si... read more

Compactor wouldn't turn on but I could reach up with my finger when the door was closed and activate the trash compactor. So I knew it was operating properly it just was not connecting when we pushed up the toe plate

  • Customer: kim from spring TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 23 of 26 people found this instruction helpful
It was unbelievably easy!! I used a screw driver to remove two screws then replaced with the new activator. $15 total fix... As opposed to $150+ for a service call and repair!!! Woo hoo... read more

Compactor stuck in lower position

  • Customer: Asbjorn from The Woodlands TX
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Wrench(Adjustable)
  • 21 of 23 people found this instruction helpful
Moved the compactor out from under cabinet and unplugged the powercable.Laid compactor over on its side Removed the top (4 screws) and base plate (3 screws) as well as the coverplate for the motor(3 screws)Found that large drive was broken in half. Used two screwdrivers to start split ring then pliers to pull it off the rest of the way.
Removed the driv... read more