Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KTRS25KDWH01

KTRS25KDWH01 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KTRS25KDWH01

If you know the refrigerator repair part you need, you can browse the list of all parts on the KTRS25KDWH01, or you can search by name or part description. You can also find your part by where it is located on the KTRS25KDWH01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KTRS25KDWH01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$40.25

Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a mounting nut for the blade and a cushion. This part provides forc...

Order within the next 8 hrs and your part ships today!
$62.75

Evaporator Fan Motor Kit

The evaporator is found in the back of the freezer. This kit comes with two mounting grommets, two sleeves (not to be used on porcelain models), two #8 mounting screws, and a push-on fan blade.

Order within the next 8 hrs and your part ships today!
$27.50

Shelf Support Stud

This is a 12 piece kit.

Order within the next 8 hrs and your part ships today!
$7.20

Touch-Up Paint - White

18ml

Order within the next 8 hrs and your part ships today!
$11.07

Spray Paint - 12 oz. - White

Order within the next 8 hrs and your part ships today!
$50.21

Front Roller - Kit of 2

Support wheel assembly with bracket. Kit of 2.

$31.47

Roller and Eyelet - Kit of 2

Order within the next 8 hrs and your part ships today!
$10.01

Egg Container

This part is used to hold eggs.

Order within the next 8 hrs and your part ships today!
$6.60

Touch-up Paint - Black

16ml

Order within the next 8 hrs and your part ships today!
$22.81

Shelf Support Kit

This kit is enough for one right and one left support. There are 2 different styles of supports in this kit.

Order within the next 8 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sometimes the condenser fan would start causing the refrigerator to overheat.

  • Customer: Tom from Franklin, WI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 124 of 132 people found this instruction helpful
Unplug the appliance.
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire a... read more

Broken elbow on icemaker water fill tube.

  • Customer: Charles from Orland Hills, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 102 of 111 people found this instruction helpful
Removed 2 screws holding water fill tube to rear of refrigerator and pulled out, matched old part with new to make sure of proper match. Guide new fill tube thru hole, making sure it is aligned with slot in ice cube tray on inside of freezer. Install new plastic line from water pump outlet to water fill tube, check for leaks, job done. read more

Unit very noisy and freezer too warm

  • Customer: Michael from Churchville, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 64 of 68 people found this instruction helpful
First I removed the racks in the freezer. The rack supports on the sides lift off without tools. The evaporator cover is at the back of the freezer. 4 phillips head screws. The cover lifts up then forward to expose the evaporator, evaporator fan and duct. The duct is held by 3 hex head screws. The evaporator fan is attached to the duct with a wiring pigtail ... read more