Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
Below is a list of all parts for the KitchenAid Refrigerator KSSS48QDX05. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
The ice maker ensures your refrigerator generates and dispenses ice. There may be an issue with yours if it leaks water, generates too much or too little ice, or dispenses too much...
The icemaker control assembly is located in the freezer section of your refrigerator. It is what controls the icemaker. The control turns the timing cams and the ejector blades. It controls most of the basic parts and functions, such as the heater, the water inlet valve, the cube size, and cube ejection. This replacement includes the control module and the motor, the motor is not sold separately. There are a number of reasons you might need to replace this part: if the motor is faulty, if any of the gears are worn out, or any of the plastic pieces are broken or damaged. If your icemaker is not functioning properly, you should start by testing this module. Before you begin repairing your refrigerator, make sure it is unplugged.
This light rocker light switch is used in a number of household appliances. It is most often found in refrigerators and freezers. This is a simple mechanism that helps turn the lig...
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
This white ice bin auger drum comes with a washer.
This switch is located inside the dispenser.
Used with Evaporator Fan Motors.
When the icemaker shut off arm is high enough the icemaker will shut off and no more ice will be made until the level of ice in the bin drops. Also, the icemaker can be turned off by lifting the arm all the way to the top until in a locked position. If your icemaker is dispensing too much ice or is not making enough ice, you may have to replace the icemaker shut off arm. This part is made of white plastic and metal. This icemaker shut off arm may differ in design from your previous part. However, the part will still perform the same function.
This metallic screw is less than an inch long and comes with a plastic washer.
This kit is intended for use with refrigerators that have a water dispenser in the door.
This refrigerator ice maker fill cup dispenses the water into the ice cube mold during the fill cycle. Replacing the water fill cup is a possible solution if you notice that the ice maker is leaking, or not making/dispensing ice. If you notice the fill cup has been damaged or cracked; replace the part straight away. This water fill cup is a genuine OEM part and will fit most refrigerators, but check the list of compatible brands to make sure yours is included before purchasing.
The ice maker thermostat, also known as the cycling thermostat, controls and regulates the ice maker ejection cycle by monitoring the temperature inside the freezer to determine wh...
This part attaches to the drive shaft of the ice dispenser motor.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.