KSSS42QDX05 KitchenAid Refrigerator - Instructions

Replaced with new ice machine. Three screws to take out ice machine, took off water lines put new one in. Could not be easier.

Did troubleshooting as manuel indicated. Had same problem once before. The replacement did the trick.

I simply followed the video on the partselect web site on my laptop while I did the replacement and it was easy! The online videos are the greatest way to do the repairs.

I watched the video provided on your website and followed the directives. It was just as easy and simple as noted in the video.

Before purchasing the part, I watched the ParSelect installation video. The video gave me the insight as to my ability to replace the part and the correctness of the part for my ice bin. The video made it extremely easy and quick to replace the auger drum (propeller looking thing that pushes out the ice).

removed the ice maker and removed all the parts to see what was needed. Only needed the drum. Very easy to do yourself and received the part very quick. Completed the job in about four days due to waiting on part. The work to take apart and put back together about one hour.

The small arm in the tray for the ice maker stopped moving. I put hot water in there to see if anything was clogging up the line or the tray, but nothing was. I then pushed on the arm and it moved pretty easily. So I took off the front cover and the motor; I saw that the plastic piece connecting to the gear was broken. So I realigned and replaced the motor. Ice maker is working like a champ again.

Replaced the output nozzle and hose that goes through the door and down under the frig.Wasnt sure if I could push new hose down through door so hooked the two hoses together so I could pull the new hose into place. To hook them together i took a short screw, cut off the head and screwed it into both hoses and put one wrap of tape around it. Pulled through the first time.

First of all when deciding where to order part from I could have saved a couple of bucks on another site but I chose PartSelect because of the video showing exactly how to install the part. When installing the new part it went in exactly as described. Part seems sturdy. Ice bin now works like new again. Hopefully it will last at least as long as the original. Part was good, delivery was quick. I will look here again if I need more parts for any appliance.

Removed the broken auger blade part,replaced it with the new one. Simple easy,and with the fast service you provided repair was accomplished quickly. Will contact your company for all of my whirlpool parts needs.

I watched the video and thought "I can do this". Made some notes and then proceeded to remove the old switch and replace with the new one. Thank you.

I have never before seen a bulb with the filament intact not light. If the bulb's filament seems intact, screw the bulb into a known working lamp and see if it lights. When screwing it back into the socket in the fridge, it takes a bit of extra effort to fully seat (until it does, it won't light!). For replacing the switch, I unplugged the unit, used a paint scraper and worked it under the switch bezel from the right side. A bit of moxie, and the switch came out. The replacement switch had a different spade contact spacing than the original. I used a pair of scissors to cut the rubber bridge between the two switch wire connectors so I could connect to the new switch. In the end, it turned out to be the bulb. NOTE: The Model TC18KL is _not_ listed! What I finally found that the number "P7803211WL" on the sticker is actually a manufacturing code. Found this out by searching, and Sears' part search came up with matches.

Had a 1999 Kitchenaid Superba refrigerator that quit making ice. Based on online research, my icemaker's problem could have been either the icemaker itself or the dual water valve. I opted to try the icemaker replacement first after watching the helpful installation video. The only issue I had that made the repair the slightest bit difficult was that bolt-headed screws were used to secure the icemaker to the fridge wall rather than Phillips and the one nearest the door can't be seen while trying to loosen it. It only took an extra ten minutes to overcome this obstacle (maybe 20 minutes total). After replacing the icemaker, I thought the water valve must have been the problem after all since the unit did not immediately start filling with water. However, once the unit chilled down, it worked perfectly.

Loosened 2 screws,un pluged the wiring harness,pluged the new ice maker in,tightened the 2 screws. . And I now have ice!! Very easy to install. .

Found the replacement icemaker I needed on your web site,ordered and recdeived it within 2 days. Watched the how to video and did the replacement in less than 5 minutes.However,I waited(2 days) for the icemaker to start working, it never did. Thinking there was another problem in the icemaking system, I contacted a local appliance repair shop. They checked the entire system and everything was ok except the new icemaker. Turns out the new icemaker was defective. I contacted PartSelect and reported the technicians findings. I had another new icemaker in 2 days again. I again installed the new one and am now making ice. Thank you for the installation video and the teriffic service.