Models > KSRS25IKSS01 > Parts

KSRS25IKSS01 KitchenAid Refrigerator - Parts

All parts for the KitchenAid Refrigerator KSRS25IKSS01

Below is a list of all parts for the KitchenAid Refrigerator KSRS25IKSS01. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KSRS25IKSS01
1-14 of 376
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Lower Door Closing Cam

This door closing cam is located on the bottom of the fridge/freezer.


Light Bulb - 40W

Sold individually.


Water Inlet Valve

Note: This valve has been updated by the manufacturer and NO longer includes the removable pre-filter bracket connector. Must be ordered separately on PS3502196


Door Cam - Black

Note: As per manufacture a new screw is needed to mount door cam. Sold individually.


Ice and Water Filter

This filter is mounted in the bottom grille. Sold individually.


Control Bracket

This bracket holds the micro switches and the light in the freezer dispenser section.


Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.


Ice Guide

This ice guide is located in the freezer door.


Bi-Metal Defrost Thermostat

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.


Emitter and Receiver Boards

These boards tells the icemaker when it's full and that it has to dump the ice, and it also tells the icemaker when to refill with water.



This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.



This screw is sold individually.


Micro Switch

This switch is located inside the dispenser.


Light Bulb - 10W

This 10 watt light bulb is used with both washers and dryers. Sold individually.

All Parts for the KSRS25IKSS01
1-14 of 376