Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KSRG25FKSS16 > Parts

KSRG25FKSS16 KitchenAid Refrigerator - Parts

All parts for the KitchenAid Refrigerator KSRG25FKSS16

Below is a list of all parts for the KitchenAid Refrigerator KSRG25FKSS16. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KSRG25FKSS16
43-56 of 330
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$22.43

Top Hinge - Right Side

$5.54

Screw

Sold individually.

$5.52

Screw

Sold individually.

$31.53

Dairy Compartment Door

This dairy compartment door is located inside the refrigerator. It is used as a protective shield for your dairy products. If the door is broken or one of the mounting tops has broken off, it is best to replace it. To replace it, release the tabs and pull out old dairy door. Next, line up the new one by putting one side onto the peg and then pressing on the other side to flex it, eventually putting the other peg in. Make sure to open and close the shield to test it. Wear safety gloves as a safety precaution and remember to refer to the manual provided by the manufacturer for further installation instructions.

$19.73

Door Hinge Set

Both bottom door hinges are included in this set.

$30.64

Thermostat Order 542369 Cement

The ice maker thermostat, also known as the cycling thermostat, controls and regulates the ice maker ejection cycle by monitoring the temperature inside the freezer to determine when to release the ice into the bin and start the ice making cycle again. If your ice maker is making unusual noises, or if the ice maker is not making or dispensing ice, there could be an issue with the thermostat. Before you begin this repair, make sure the power is disconnected from your refrigerator, and that any food that may spoil is safely stored. This is an OEM part and is sourced directly from the manufacturer. This thermostat is sold individually, and comes with two attachment clips.

$31.33

Water Filter Outlet Tube Kit

$100.08

Icemaker Motor Kit

This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.

$42.08

Push-On Start Relay

This is a push-on start relay for your refrigerator. It attaches to the compressor and starts it by briefly boosting it. It will then shut off as soon as the motor is up to the req...

$39.86

GRILLE

$6.85

Dispenser Door Pin

This dispenser door pin comes with the washer.

$95.74

Ice Mold

This is an ice maker mold and heater assembly for a refrigerator ice maker. It is used with modular style icemakers and is located in the freezer section of the refrigerator. This ice mold is flake resistant which prevents the coating on the mold from flaking into the ice cubes when the ice mold begins to wear. The ice mold forms the ice cubes and the heater allows the ice cubes to fall from the ice mold to drop them into the ice bucket. You will need to remove the ice maker from the refrigerator to access the mold and heater assembly. This is a genuine replacement part.

$125.70

Fresh Food Door Gasket - Black

This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

$31.47

Roller and Eyelet - Kit of 2

All Parts for the KSRG25FKSS16
43-56 of 330