KSRG25FKSS16 KitchenAid Refrigerator - Instructions

The replacement went very easy, however I still have no ice. I'm not sure what to check for next. Any ideas? I unplugged it for about 2 minutes and nothing. I do not hear the water filling the unit, the water on the door works fine though.

The refrigerator door was not staying closed. Arriving home we found it open and not running. The compressor was off on thermal overload. In checking that and while cleaning the condenser I noticed the refrigerator door was 1/4" lower than the freezer. I saw how the door cams worked to keep the doors closed. The installation was easy. I blocked up the door. Removed the old cams using a small socket and installed the new. Door cams tool less than fifteen minutes.

Removal of escutcheon was easy. Replacing icedoor was fairly easy, working with wires in the way was a little distracting but simple. Be careful with microswitches and locating pins. Two of mine broke, had to replace bracket. Simple job again. Everything working fine now. No ice jam in chute. Using needlenose pliers to remove/insert pin is the best and easiest option.

I followed the video on your web site and that was it.

The repair was extremely simple. The video was very helpful.

Figured out You have to pop off the cocer than remove the 1/4 hex head screws only not the philips ones

I fellow the installation instructions

I went exactly as the video claimed. I was almost too simple a repair.

I had to drill holding bolt out to get handle off. Placed order with Partselect for new handle which shipped to me the next day. Received handle in matter of days and installed in minutes.GREAT JOB PARTSELECT. I would refer you to all my friends.

Lower door closing cam was completely worn down so door wouldn't close on it's own. Ordered parts which arrived in a couple of days. After watching installation video on this website the job looked pretty easy. Needed socket wrench to loosen nuts at top, they were really tight. Removed door. Replaced both the cam on the bottom of door and the cam on the main unit, put door back on making sure it was straight and lined up properly. Retightened top nuts securely. Voila, problem fixed in only about 15 minutes or so.

the water stain on the dispenser grille was unsightly even after cleaning with baking soda and vinegar, hence, we purchased a new one. popped the old one out and put new one in. have used parts select in the past and their pricing was very competitive if not better than over vendors.

Follow the video.

unsnap old teay snap new one in very easy

Turned off the water to the ice maker; disconnected the wiring harness to the ice maker; unscrewed it from the freezer (two screws). Unhooked the ice lever bar, opened up the motor assembly. Switch the motor out (two screws). Installed in reverse order.

If you are having this problem, read this. My refrigerator door would not stay closed. This was over a year and a half time period. I thought it was something complicated and told my wife to call a repairman. Thank goodness she does what she does best - not listening to me! I finally had enough and went online and googled my problem and found PartsSelect. PartSelect had a repair video showing how to fix the problem. If you are like me, I'm very cautious about purchasing from a website in which I'm not familiar. PartsSelect is a reputable site (I promise I do not work for them). My refrigerator is over 8 years old and they had the part I needed, a lower door cam, along with a video on how to install the part. This honestly took about 5-10 minutes to do and I did it without any help. I was so aggravated at myself for waiting so long at doing this!! I actually ordered 2 of these parts, just for the next time. You can do this.