Models > KSRG25FKSS15 > Parts

KSRG25FKSS15 KitchenAid Refrigerator - Parts

All parts for the KitchenAid Refrigerator KSRG25FKSS15

Below is a list of all parts for the KitchenAid Refrigerator KSRG25FKSS15. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KSRG25FKSS15
1-14 of 332
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.76

Lower Door Closing Cam

This door closing cam is located on the bottom of the fridge/freezer.

$44.50

Ice and Water Filter

This filter is mounted in the bottom grille. Sold individually.

$114.64

Ice Maker Assembly - 8 Cube

This icemaker can be used with 25-27 cubic feet refrigerators that have a vertical auger dispenser located on the freezer door. Reuse bottom bracket from the original icemaker and...

$2.52

Light Bulb - 40W

Sold individually.

$3.84

Door Cam

Note: As per manufacture a new screw is needed to mount door cam. Sold individually.

$143.96

Electronic Control Boards - Emitter and Receiver

This set of two electronic control boards contains both the emitter and the receiver. These boards tells the icemaker when it's full and that it has to dump the ice, and it also tells the icemaker when to refill with water.

$8.38

Control Bracket

This bracket holds the micro switches and the light in the freezer dispenser section.

$72.48

Water Inlet Valve

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold. Note: This valve has been updated by the manufacturer and NO longer includes the removable pre-filter bracket connector. Must be ordered separately on PS3502196

$73.62

Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

$8.56

Ice Guide

This ice guide is located in the freezer door.

$50.59

Ice Door Kit

This kit includes the ice door, support, spring and delay. The heater ribbon is no longer attached - the heater is no longer needed.

$20.36

Dispenser Grille

This black grille is located on the bottom of the ice/water dispenser to catch the overflow.

$15.44

CAPACITOR

$76.26

Condenser Fan Motor Kit

This kit includes the motor, fan blade, wire harness and screws. ***NOTE: The manufacturer has changed the product to appear different than the original, but will still function the same as the original part. It is an OEM factory replacement.

All Parts for the KSRG25FKSS15
1-14 of 332