Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
Below is a list of all parts for the KitchenAid Refrigerator KSRB25FHSS02. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This white ice bin auger drum comes with a washer.
This black water filter cap is located near the bottom kickplate.
The icemaker water fill tube provides water to the icemaker so it can produce ice and dispense water. If you notice that your ice maker is not making or dispensing ice, or is leaki...
The filter is NOT included with this part. This part has a 1/4" and a 5/16" push on fittings - that way, you can push in the water lines for easy installation.
As per the manufacturer, this part starts out as 1/4" tubing but ends up at 5/16".
Bucket only. All other parts sold separately. This part holds the ice once it's released from the icemaker.
This switch is located inside the dispenser.
Used with Evaporator Fan Motors.
*Please note, this door chute is no longer being manufactured with a heater.
This part covers your light bulb.
When the icemaker shut off arm is high enough the icemaker will shut off and no more ice will be made until the level of ice in the bin drops. Also, the icemaker can be turned off ...
This metallic screw is less than an inch long and comes with a plastic washer.
This part is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. Fan blad...
The purpose of the light switch in your refrigerator is to automatically turn on the light when the door is opened. If the light does not come on automatically when you open the door, the contacts inside the light switch may be burned out, meaning it is time to replace the switch. This package contains both the new light switch and a small plastic spacer. To complete this repair, you will need to remove the control panel section of your refrigerator. The only tools you will require for this repair are a 1/4-inch nut driver and maybe a small flat blade screwdriver. Be sure to disconnect the power source from the refrigerator before completing this repair.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.