Models > KSRB25FHSS02

KSRB25FHSS02 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KSRB25FHSS02

If you know the refrigerator repair part you need, you can browse the list of all parts on the KSRB25FHSS02, or you can search by name or part description. You can also find your part by where it is located on the KSRB25FHSS02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KSRB25FHSS02 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

Order within the next 6 hrs and your part ships today!
$5.61

Lower Door Closing Cam

This door closing cam is located on the bottom of the fridge/freezer.

Order within the next 6 hrs and your part ships today!
$106.96

Replacement Ice Maker

***NOTE: Ice maker does NOT come with the bail or shut off arms. Must order them separately if required. It does come complete with flat and round plug wiring harness, the mounti...

Order within the next 6 hrs and your part ships today!
$65.88

Ice and Water Filter

This filter is mounted in the bottom grille. Sold individually.

Order within the next 6 hrs and your part ships today!
$67.70

Water Inlet Valve

Note: This valve has been updated by the manufacturer and NO longer includes the removable pre-filter bracket connector. Must be ordered separately on PS3502196

Order within the next 6 hrs and your part ships today!
$13.53

Defrost Timer Kit - 120V 60Hz

This eight-hour defrost timer will replace most other defrost timers. This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater. The best way to make sure you get the correct timer for your refrigerator is to conduct a search for your model number.

Order within the next 6 hrs and your part ships today!
$5.74

Door Cam - Black

Note: As per manufacture a new screw is needed to mount door cam. Sold individually.

Order within the next 6 hrs and your part ships today!
$8.38

Control Bracket

This bracket holds the micro switches and the light in the freezer dispenser section.

Order within the next 6 hrs and your part ships today!
$7.77

Ice Guide

This ice guide is located in the freezer door.

Order within the next 6 hrs and your part ships today!
$66.61

Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

Order within the next 6 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice Maker quit working, I could manually cycle unit but then the water would overflow when unit was re-filling.

  • Customer: Max from Green Castle IN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 509 of 520 people found this instruction helpful
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and... read more

Front wheel was broken when moving refrigerator

  • Customer: Jeff from Midway GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 471 of 478 people found this instruction helpful
Lifted the front up onto a scrap 2x4 to get it off the ground and it had 1 bolt that you removed to get the old item off and replace with new assymbly and 1 bolt to re attach. This sat broke for over a year becuase I thought it would be alot harder to fix, found the part on parts select ordered it recieved it in approx 2 days and had it fixed in less than 15... read more

was not making ice

  • Customer: GLENN from ORLAND PARK IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 465 of 491 people found this instruction helpful
take out ice bucket, just loosen the top 2 screws, remove the bottom screw, slide ice maker up & out, srewdriver to release wiring harness clip, reverse to put back in. was very simple. did not install water inlet kit yet. water under fridge stopped after i changed the ice maker. read more