Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KSRA25CNSS00 > Parts

KSRA25CNSS00 KitchenAid Refrigerator - Parts

All parts for the KitchenAid Refrigerator KSRA25CNSS00

Below is a list of all parts for the KitchenAid Refrigerator KSRA25CNSS00. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KSRA25CNSS00
43-56 of 364
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$30.64

Thermostat Order 542369 Cement

The ice maker thermostat, also known as the cycling thermostat, controls and regulates the ice maker ejection cycle by monitoring the temperature inside the freezer to determine wh...

$17.88

Water Fill Cup and Bearing

This refrigerator ice maker fill cup dispenses the water into the ice cube mold during the fill cycle. Replacing the water fill cup is a possible solution if you notice that the ice maker is leaking, or not making/dispensing ice. If you notice the fill cup has been damaged or cracked; replace the part straight away. This water fill cup is a genuine OEM part and will fit most refrigerators, but check the list of compatible brands to make sure yours is included before purchasing.

$4.12

Bracket, Icemaker Cover

$5.52

Screw

Sold individually.

$126.04

Fresh Food Door Gasket - Black

This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

$26.66

Thermistor

This part is used to detect the temperature in the air inside of your refrigerator.

$22.43

Top Hinge - Right Side

$6.85

Dispenser Door Pin

This dispenser door pin comes with the washer.

$6.24

Touch-Up Paint - White

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, ...

$31.53

Dairy Compartment Door

This dairy compartment door is located inside the refrigerator. It is used as a protective shield for your dairy products. If the door is broken or one of the mounting tops has broken off, it is best to replace it. To replace it, release the tabs and pull out old dairy door. Next, line up the new one by putting one side onto the peg and then pressing on the other side to flex it, eventually putting the other peg in. Make sure to open and close the shield to test it. Wear safety gloves as a safety precaution and remember to refer to the manual provided by the manufacturer for further installation instructions.

$42.08

Push-On Start Relay

This is a push-on start relay for your refrigerator. It attaches to the compressor and starts it by briefly boosting it. It will then shut off as soon as the motor is up to the req...

$48.72

Heater, Defrost

The heater is located at the bottom of the evaporator. The defrost heater heats the evaporator in the defrost mode of operation. The thermostat must be replaced when replacing the defrost heater.

$30.04

Stripper Arm Kit

This kit includes the stripper arm and fill cup.

$128.60

Fresh Food Door Gasket

This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

All Parts for the KSRA25CNSS00
43-56 of 364