Models > KSRA25CNSS00 > Parts

KSRA25CNSS00 KitchenAid Refrigerator - Parts

All parts for the KitchenAid Refrigerator KSRA25CNSS00

Below is a list of all parts for the KitchenAid Refrigerator KSRA25CNSS00. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KSRA25CNSS00
15-28 of 364
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?


This screw is sold individually.


Combination Start Device

NOTE: This part has been replaced by the manufacturer. It may look different from the original but will still function the same. This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.


Water Filter Cap

This black water filter cap is located near the bottom kickplate.


Water Filter Housing

The filter is NOT included with this part. This part has a 1/4" and a 5/16" push on fittings - that way, you can push in the water lines for easy installation.


Door Bin

Sold individually.


Filter Inlet Water Tube

As per the manufacturer, this part starts out as 1/4" tubing but ends up at 5/16".


Water Fill Cup and Bearing




Ice Dispenser Door Chute

*Please note, this door chute is no longer being manufactured with a heater.


Evaporator Fan Motor - 120V 60Hz

This part is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. Fan blade not included.


Installation Screw

This screw is sold individually.


Fan Blade

Used with Evaporator Fan Motors.


Single Shelf Stud

This part screws into the side of the wall in your fresh food compartment and supports a shelf.



Sold individually.

All Parts for the KSRA25CNSS00
15-28 of 364