KSCS25INSS01 KitchenAid Refrigerator - Instructions

Changed the Motor Assembly. Wasn't the problem. If I had followed your trouble chart a little farther I would have found out it was the circuit boards. All is well and I might add that yor guide with the parts and video are priceless. Very Happy. Lowell Onstad

As your video showed. Used kitchen knife to get connection tight

I followed the instructions given by your demonstration. I took the back screw off, dropped the wire plastic cover. I then used the screwdriver to push the two (2)slots in and pulled the icemaker out and then unplugged it. I believe unplugging it was a little hard because the plug was pretty well sealed together and frozen. After finally getting the plug apart I then pulled the icemaker fully out. After pulling the cover off and putting it on the new one per your demonstration, I then inserted it back in. I stuck my hand behind the icemaker and bent the hose with my index finger and thumb so that it would drop into the water tray and then slid the icemaker back in until it snapped back in the slots. I then put the plug cover back on and reinserted the screw. I forgot to mention taking the front cover off before removing the icemake and reinserting it after replacing the icemaker. I would highly suggest customers follow your demonstration, it paid off well. I watched it about 8 times before I received the icemaker in the mail. Oh by the way water started flowing into the icemaker with 4 minutes and ice started coming out in about 30 minutes. As the icemaker got colder it started producing the ice faster. It's a sweet sound hearing the ice drop into the container.

Removed door, removed both upper and lower cam and replaced, applied small amount of vasoline and replaced the door. The entire repair took less than 5 minutes. Door works great. When replacing the cam you need to replace both the upper and lower cam. When you order the parts, the upper cam is on the door schematic and the lower cam is on the refrigerator body schematic. I originally only ordered the upper cam.

Unplug regrigerator power cordfrom wall outlet. Using nut driver remove cover from lower back side of refrigerator. Unplug wire connection to fan. Using nut driver remove the four screws holding the fan/bracket assembly. Carefully remove fan/bracket assembly from refrigerator. Using nut driver,remove the old fan from fan bracket. Using nut driver install new fan on fan bracket. Carfefully install new fan/bracket assembly and install the four screws. Plug wire connection to fan (you may need to use adapter supplied with new fan). Reinstall refrigerator lower back cover. Plug refrigerator power cord back into outlet. Note: you may wish to carefully vacuum dust from back of refrigerator before installing back cover. You should also vacuum dust from front side.

Disconnected power cord, removed rear cover of refrigerator, disconnected pig tail, removed 4 housing screws, took three mount screws out and removed old fan. Reversed steps, plugged in and complete repair done.

Remove icemaker control assembly, replaced with new one.

Once it was determined that the icemaker was actually the problem two really good things happened. One, there was a video on the repair process on the web site. I wish I had viewed it before I removed the icemaker because it would have saved me about 10 minutes in that process. Second, I order the part on Friday morning around 10:00 a.m. and then went to the store to buy bag ice to get us through the weekend. On Saturday morning, the part was at my door ... yep, less than 24 hours! Everything was back in working order in about 15 minutes, part of that was my wife taking advantage of the shelf being out to do a little extra cleaning and reorganizing. Thanks for the video and excellent service. Ron Coulter, Celebration, FL

I took out the icemaker to see if I could find a problem and the ice tray coating was peeling, the tray heater was corroded and so was the motor assembly. I matched the picture on the site to my icemaker, checked the dimensions they gave and it was identical so I ordered it. Install was pretty easy and the icemaker started working within minutes. Thanks!

I watched the video then made the repair it was just like the video said very easy

Simply stick a putty knife between the switch and refrig wall. Pop out old swith, remove both wires by pulling off switch by terminals. Throw switch out. Put wires on new switch and push into slot and all done. Nothing to it! Took me 5 minutes if th

It was so easy, one screw to remove the plug cover, slide out unit, unplug, take off bottom by unscrewing 3 screws, place bottom on new unit, plug in, slide in place, replace cover, and let it get cold before turning on icemaker. The video on your site really helped.

Watched the video and realized how easy it really was....followed directions and completed repair in less than 5 min....only issue Fed Ex lost original order....parts person was great...overnighted me a replacement

I started by viewing the video online showing how to make the repair. I then unplugged the fridge, taped the cover of the icemaker up out of the way. It was then a matter of removing three screws on both the emitter and receiver sides of the freezer and two screws each to remove the boards. I uplugged the modular plugs from each board and then reversed the proceedure. Icemaker is now working like new.

Just press the new replacement cap over the end of the water filter.