KSCS25FKSS02 KitchenAid Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
ice maker got out of time water frooze with paddle down in the the ice tried to dump and spin (broke ) the timer gear off
turned off power unscrewed all the screw that mount ice maker, used flat head to release the clip on the wire harness, took out and exchanged the overfill wire, plugged the new unit in at wire harness, lined up and leveled ice maker tighten all the mounting screws, very simple repair i am very happy that you still had the orginal (OEM) ice maker, thanks Herb
Parts Used:
-
Herbert from San Antonio, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice maker not dispensing correctly
-
Frank from Las Vegas, NV
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
plastic stopper came off arm
with a mirror to see the small hole on the front side of the icemaker.... very simple, took 1 minute
Parts Used:
-
TinTina from Bruce, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped turning out ice
Removed three screws. Removed old part. Inserted new part and reinstalled three screws. Doesn't get much easier that
Parts Used:
-
James from Wasilla, AK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Fridge door wouldn't shut on its own
We logged on looking for a possible cause and solution. We found your website, diagnosed the problem, ordered the part and it came in two days. You even had a step by step video on how to change out the part. Kudos to you. Thank You
Parts Used:
-
Catherine from Strongsville, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken drum
I took the tray out of ice maker, removed the screws holding the drum assembly. Dismantling the drum assembly careful as possible and placing the new drum on place of broken one, it still took twice to get it workable. Probably the next time I will follow the instructions a little more closely.
Parts Used:
-
William from Petal, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped working
The repair man came out and said the Ice Maker is broken.He said to call him when I get the part but after looking at the video it took 10 minutes to Install. If you can use a screw driver this part is a piece of cake. Oh don't forget to unplug the frig. God Luck John Bronx NY
Parts Used:
-
JOHN from Bronx, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ref door was making a popping noise
New part was not needed, when I removed lower closing cam the lower part of the closing cam attachment screw had worked it's self lose. So it just needed to be re-torqued. That took care of the problem.
Parts Used:
-
Melvin H. from Pearson, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
fridge stopped making ice
Removed cover took out 2 screws put in new unit put 2 screws back in put cover on done
Parts Used:
-
Chris from Bethel Park, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
water dispenser quit working
Went to parts select and found diagram of parts then found their page that shows percentages of each part being the cause (very helpful) then I watched video of repair (very, very helpful) and fixed the problem. Your company, PartSelect is the best! Rick
Parts Used:
-
Richard from Springfield, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice shute tabs broke not allowing the guide to remain in place
Repair was easy ordered correct part according to the model number new Ice guide Shute snapped into place according to the repair video guide.
Parts Used:
-
Diane from Lawrenceville, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
replace ice maker in refigarator
-
Jimmy from Strong, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Water Leaking - No Ice.
I had a wet floor and called a plumber. Then I discovered that there was no ice. Checked and found a broken tube going to the ice maker. Cancelled plumber. Tried to fix the broken tube and caused more leaks. Decided to order a new solenoid. When the parts came I installed the solenoid and replaced a short bit of the hose going to the ice maker. No joy, no water going to the ice maker. I removed the ice maker, and checked the supply tube. It was choked with ice. Removed the ice plug and it now works like it should.
Parts Used:
-
Dave from Arleta, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
water dispencer quit working
watched the video. If your water dispenser is working on and off and it eventual quits,it is the water control vale that needs to be replaced.
Parts Used:
-
Alan from Crossville, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water was pouring into ice bucket instead of filling the ice maker.
I replaced the ice maker with a new one. All part were included. The cost was about $200.00 cheaper than what the repair person wanted.
Parts Used:
-
Kim from Killeen, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!