Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
D
July 5, 2021
My pitcher seems to be leaking out the bottom when in use. I’ve tried to tighten it. Is there another way to tighten it?
For model number KSB560ER1
Hello D, Thank you for the question. If the Jar is leaking it will need to be replaced. The parts to the jar are not sold separate and it can not be tightened down. We hope this helps!
Part for bottom of picture that holds blade in place, clear
For model number KSB560ER1
Hello Wanda and thank you for writing.
This part is only sold as part of the Jar assembly part number: PS11754093 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
I didn't realize there was a spoon in the blender and it made a total racket as the blades and housing were falling apart. The blender jar, blades and housing are all one piece so my less than 2 month old blender was completely trashed. Rather than spend $100 on a new blender, I spent $24 on a new jar... popped it on the blender in plac
... Read moree of the old one and it's better than new! And I'm much more careful using it!
Put masking tape around the coupling and put the coupling in a vise upside down. took the bottom apart and unscrewed the main shaft screw. ITS LEFT HAND THREAD!!! Screw on new coupling and put the bottom back on.The masking tape is just to protect the finish.