Models > KRFF15MTWH00 > Parts

KRFF15MTWH00 KitchenAid Freezer - Parts

All parts for the KitchenAid Freezer KRFF15MTWH00

Below is a list of all parts for the KitchenAid Freezer KRFF15MTWH00. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KRFF15MTWH00
1-14 of 248
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.52

Light Bulb - 40W

Sold individually.

$72.18

Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

$16.78

Defrost Timer Kit

This eight-hour defrost timer will replace most other defrost timers. This device acts like a clock. It continually advances and alternates between activating the cooling cycle an...

$30.70

Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a blade mounting nut, and a cushion. This part provides forced-air cooling for the condenser coil.

$3.76

Icemaker Water Fill Tube Kit

This kit comes with a fill tube and a compression nut.

$15.05

Water Fill Cup and Bearing

$5.25

Touch-Up Paint - White

$3.56

Water Tube Kit

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$35.74

Single Outlet Water Valve Kit

The water inlet valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold. ***Please NOTE: This part has been redesigned and may appear different than the original. It has a new quick connection. To install: cut the retaining nut off the existing water line and gently push into new valve. To remove: depress the ring that the tube slides into.

$24.48

Thermostat with Clips

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.

$67.84

Ice Mold

This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.

$3.96

Compression Nut

$3.96

Door Hinge Nylon Washer

All Parts for the KRFF15MTWH00
1-14 of 248