Models
>
KRFC300ESS00
KRFC300ESS00 KitchenAid Refrigerator - Overview
Sections of the KRFC300ESS00
[Viewing 10 of 10]Keep searches simple, eg. "belt" or "pump".
Refrigerator Water Filter
PartSelect #: PS11722130
Manufacturer #: EDR4RXD1
This water filter (Whirlpool EveryDrop Refrigerator Water Filter, Single Turn Filter) purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it...
$103.96
In Stock
Refrigerator Pantry Drawer Door Cover
PartSelect #: PS11723190
Manufacturer #: W10827015
This pantry drawer lid is also known as a pantry drawer door or pantry drawer cover. This is a genuine OEM part, and is sold individually. This part helps keep everything inside the drawer. It acts as...
$116.03
In Stock
Crisper Drawer
PartSelect #: PS11743502
Manufacturer #: WP67002659
The crisper drawer in your refrigerator is used for storing various items. If you notice that your current crisper drawer is damaged, you may need to replace it. You may notice that your refrigerator ...
$103.44
In Stock
Pantry End Cap - Right Side
PartSelect #: PS11738568
Manufacturer #: WP12656018
This part mounts on the wall and is used to support the pantry drawer.
$40.87
In Stock
Pantry End Cap - Left Side
PartSelect #: PS11738573
Manufacturer #: WP12656105
The pantry end cap is also known as a drawer support or a door shelf trim. This specific piece is sold individually and is meant for the left side of your refrigerator. It snaps into place on the door...
$62.03
In Stock
Refrigerator Door Switch
PartSelect #: PS12728638
Manufacturer #: W11384469
Door switch turns the light off when you close the door.
$38.48
In Stock
Door Switch
PartSelect #: PS12731166
Manufacturer #: W11396033
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
$27.65
In Stock
P-Trap Drain Tube Kit
PartSelect #: PS8691807
Manufacturer #: W10619951
The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed...
$39.43
In Stock
Refrigerator Door Bin
PartSelect #: PS11752093
Manufacturer #: WPW10289497
This door bin is for refrigerators.
The door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
Follow the instructions in the owner's manual for installin...
$48.73
In Stock
Door Bin
PartSelect #: PS11753892
Manufacturer #: WPW10371194
Sold individually. 14 by 6-1/4 by 3-1/2 inches
$53.03
In Stock
Questions And Answers for KRFC300ESS00
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Craig
March 7, 2020
Bottom handle on refrigerator to open freezer came loose. I need new 3/32" set screws to tighten the handle correctly. Can I purchase the correct ones from KitchenAid? I can't find anywhere in parts info online. Can you help me?
For model number KRFC300ESS00
Hello Craig, Thank you for the question. Very sorry but we do not sell the Tools here at PartSelect.com. We suggest contacting KitchenAid or local hardware store. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Janet
August 9, 2023
I need a Freezer LED Lamp replacement. The bulb says it’s from Ansen Electronics and has a model W10745744 on it I have searched your part website and don’t see it it. Please help.
For model number KRFC300ESS00
Hi Janet, thank you for getting in touch. The part you are looking for is the LED light bulb, part number PS12717432. Please submit a new question if you have any follow-ups!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Donna
December 8, 2023
Looking for the part that you connect water filter too, mine cracked or something when I took the filter off, it sprayed water everywhere
For model number KRFC300ESS00
Hello Donna, thank you for your question. The part that the filter connects to is the Filter Head PS12712109. We also have the water filter backing plate PS11743466 as well as Water Filter Cover PS11738541. We are pleased to have been able to help.
Was this helpful?
Thank you for voting!
Related Parts:
Guillermo
October 27, 2021
The freezer portion freezes but the refrigerator portion doesn't cool at all. Any suggestions?
For model number KRFC300ESS00
Hello Guillermo, thank you for writing. Please check the Evaporator Motor PartSelect Number PS11773024 or the Evaporator Fan Blade itself PartSelect Number PS11738973. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
Dennis
August 11, 2022
Need to see if evap fan motor is wired through defrost thermostat. Can't find wiring diagram
For model number KRFC300ESS00
Hello Dennis, Thank you for the question. For the wiring Diagram we suggest contacting KitchenAid directly as we just have the part diagrams. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the KRFC300ESS00
[Viewing 19 of 19]Light not working
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Door won’t open or close
Fixed by
these parts
these parts
Show All
Ice maker not making ice
Fixed by
these parts
these parts
Show All
Not dispensing water
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Fridge too warm
Fixed by
these parts
these parts
Show All
Frost buildup
Fixed by
these parts
these parts
Show All
Freezer not defrosting
Fixed by
these parts
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
these parts
Show All
Fridge too cold
Fixed by
these parts
these parts
Show All
Door Sweating
Fixed by
these parts
these parts
Show All
Ice maker dispenses too little ice
Fixed by
these parts
these parts
Show All
Clicking sound
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Ice maker dispenses too much ice
Fixed by
these parts
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Freezer section too warm
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
light on to order water filter
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Parts Used:
-
Douglas from Byron, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
896 of 1008 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Removing the existing filter by rotating as directed and then dislodging from 'docking' station proved difficult. Turns out, the old filter is under a bit of vacuum pressure and getting the unit to separate or release was a challenge.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate
... Read more
motions and a steady thought process on the problem helped disengage the darned old filter!
Read less
Parts Used:
-
Jake from Novato, CA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
212 of 323 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken pins holding pantry door
Removed door and crisper pans.
Removed nuts on left end cap - think there were 3.
Removed nuts on right end cap and one or two on back air regulator attached to right end cap.
Replaced left end cap with new one using reserved nuts.
Carefully removed back air regulator from right end cap.
Attached back air regula ... Read more tor to new right end cap.
Replaced right end cap and back air regulator and attached with nuts.
Carefully inserted pantry door into pin on one side and slightly bent both right and left pins to insert door fully into end caps.
Replaced crisper pans.
That's it.
Removed nuts on left end cap - think there were 3.
Removed nuts on right end cap and one or two on back air regulator attached to right end cap.
Replaced left end cap with new one using reserved nuts.
Carefully removed back air regulator from right end cap.
Attached back air regula ... Read more tor to new right end cap.
Replaced right end cap and back air regulator and attached with nuts.
Carefully inserted pantry door into pin on one side and slightly bent both right and left pins to insert door fully into end caps.
Replaced crisper pans.
That's it.
Read less
Parts Used:
-
Gregory from Bethesda, MD
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
147 of 165 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!