Models > KRB17HA-3A3

KRB17HA-3A3 (9D30A) Maytag Refrigerator - Overview

Get Parts and Repair Help for KRB17HA-3A3

If you know the refrigerator repair part you need, you can browse the list of all parts on the KRB17HA-3A3, or you can search by name or part description. You can also find your part by where it is located on the KRB17HA-3A3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KRB17HA-3A3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KRB17HA-3A3 [Viewing 3 of 3]

$2.70

Screw

This screw is sold individually.

$8.37

Light Rocker Switch

$2.70

SCREW

Sold individually.

$2.70

Screw

This is screw is sold individually.

$3.56

Plastic Tubing

1/4" Plastic tubing, 8 1/2 feet long.

$3.96

Door Shelf Trim Retainer

$5.55

Screw

This screw is sold individually.

$2.70

Water Hose Clamp

These tube clamps are sold individually. The screw is not included.

$17.75

Ice Cube Tray

This tray makes 48 mini ice cubes.

$19.61

TUBE-INLET

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

cocktails running out of ice

  • Customer: Craig from Westminster CA
  • Difficulty: Very Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 49 of 54 people found this instruction helpful
filled both ice cube trays up with water and placed in the freezer.. within hours my ice oproduction was doubled! no more warm cocktails : ) read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 36 of 43 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Thermostat ceased to function. Fridge very cold.

  • Customer: Paul from Millboro VA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Wrench set
  • 23 of 28 people found this instruction helpful
I removed control knobs and a couple of screws and forced the assembly down enough to remove the old thermostat, and insert the new one. Lucky me it was a identical replacement item. Job took about an hour. read more