Models > KIRD862VSS1

KIRD862VSS1 KitchenAid Range Hood - Overview

Sections of the KIRD862VSS1

[Viewing 1 of 1]
VENTILATION PARTS Diagram and Parts List for KitchenAid Range Hood
VENTILATION PARTS
Keep searches simple, eg. "belt" or "pump".
Fan Switch – Part Number: WPW10240604
Fan Switch
PartSelect #: PS11750886
Manufacturer #: WPW10240604
This part activates the fan motor.
$141.23
  In Stock
Push Button Assembly – Part Number: W10235663
Push Button Assembly
PartSelect #: PS2349085
Manufacturer #: W10235663
$56.59
  In Stock
CONTRL-MTR – Part Number: W10235661
CONTRL-MTR
PartSelect #: PS2349083
Manufacturer #: W10235661
$124.67
  Special Order
SWITCH – Part Number: W10235643
SWITCH
PartSelect #: PS2349066
Manufacturer #: W10235643
  No Longer Available
Fuse – Part Number: WPW10235651
Fuse
PartSelect #: PS11750779
Manufacturer #: WPW10235651
$45.74
  Special Order
HARNS-WIRE – Part Number: W10235649
HARNS-WIRE
PartSelect #: PS2349072
Manufacturer #: W10235649
  No Longer Available
SCREW-ELVT – Part Number: W10235656
SCREW-ELVT
PartSelect #: PS2349078
Manufacturer #: W10235656
  No Longer Available
FILTR-GRSE – Part Number: W10235659
FILTR-GRSE
PartSelect #: PS2349081
Manufacturer #: W10235659
  No Longer Available
FILTR-GRSE – Part Number: W10287361
FILTR-GRSE
PartSelect #: PS2580412
Manufacturer #: W10287361
  No Longer Available
Motor – Part Number: WPW10235654
Motor
PartSelect #: PS11750781
Manufacturer #: WPW10235654
$519.12
  Special Order
COVR-CNTRL – Part Number: WPW10235664A
COVR-CNTRL
PartSelect #: PS11750786
Manufacturer #: WPW10235664A
  No Longer Available
HARDWARE – Part Number: W10235658
HARDWARE
PartSelect #: PS2349080
Manufacturer #: W10235658
  No Longer Available
View More
Back to Top

Questions And Answers for KIRD862VSS1

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
On / Off switch broken
The retractable range ventilator stopped working in the up positiion. Removed grease filter. Removed existing CONTRL-MTR. Disconnected 2 flat control cables and connected them to new CONTRL-MTR and installed the new CONTRL-MTR. Also replaced the push button switch. Replaced grease filter. In testing the unit the ventilater would retract but not come back up unless I lifted the top trim piece with the push button switch in it and stuck a tooth pick in the hole to activate the switch. The down rod of the new pushbutton switch was too short. I then noticed the old push button switch had a very thin hard plastic tube extending the down rod. I transfered the tube to the new switch and it worked OK.
Read less
Parts Used:
Push Button Assembly CONTRL-MTR
  • Howard from Bonita, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top