Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KIDS42EPSS1

KIDS42EPSS1 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KIDS42EPSS1

If you know the dishwasher repair part you need, you can browse the list of all parts on the KIDS42EPSS1, or you can search by name or part description. You can also find your part by where it is located on the KIDS42EPSS1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KIDS42EPSS1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.02

Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air...

$4.94

Roller Shaft Hex Nut

This roller shaft hex nut measures well under an inch long. It is made of metal and is used for Maytag brand clothes dryers.

$25.42

Thermal Fuse and Harness

*Please Note - When changing the fuse always use a new wiring harness.

$4.89

Screw

Sold individually.

$3.02

Screw - 8-18 x 5/8

Sold individually.

$3.02

Lid Hinge Mounting Screw

Sold individually.

$41.59

Door Switch Kit

This kit comes with 2 micro switches and a wire harness.

$5.51

Hose Clamp

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.

$3.75

Hex Nut

This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, ref...

$10.46

Power Cord Kit

Includes power cord and all necessary parts needed for complete installation of cord.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Touch pad on dishwasher dead

  • Customer: Jeff from Boaz, KY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 103 of 121 people found this instruction helpful
1. Remove the two screws that attach the bottom cover.
2. Remove the 2 screws that attach the door outer cover.
3. Remove the 8 screws that attache the door inner cover.
4. Remove the plastic cover over the electronic controller.
5. Remove the two connections to the thermal fuse.
6. Remove the thermal fuse.
7. Install the new ... read more

No power to dishwasher.

  • Customer: Brad from Woodbury, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 32 of 39 people found this instruction helpful
Unplug the dishwasher. Simply removed 8 screws on the inside of the door, removed the interior door panel. Next popped of the plastic protective electrical panel cover. Locate the Thermal fuse that had simple instructions provided. Removed the fuse and replaced the harness. Put everything back together. Plugged dishwasher back into electrical outlet...Dishwa... read more

Dishwasher stopped in middle of wash cycle..

  • Customer: David from Bay City, TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 29 of 42 people found this instruction helpful
I disasembled the inner door and replaced the door switches with new ones. read more