Models > KIDS36EPSS0

KIDS36EPSS0 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KIDS36EPSS0

If you know the dishwasher repair part you need, you can browse the list of all parts on the KIDS36EPSS0, or you can search by name or part description. You can also find your part by where it is located on the KIDS36EPSS0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KIDS36EPSS0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$22.62

Thermal Fuse and Harness

*Please Note - When changing the fuse always use a new wiring harness.

$2.70

Hose Clamp

$2.03

Lid Hinge Mounting Screw

Sold individually.

$2.70

Hose Clamp

This hose clamp is sold individually.

$39.85

Door Switch Kit

This kit comes with 2 micro switches and a wire harness.

$3.83

SCREW

$2.70

Screw - 8-18 x 5/8

Sold individually.

$2.70

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$4.60

Screw

This screw is sold individually.

$2.70

Hex Nut

Part may differ in appearance, but functions same as original.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Touch pad on dishwasher dead

  • Customer: Jeff from Boaz KY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 55 of 68 people found this instruction helpful
1. Remove the two screws that attach the bottom cover.
2. Remove the 2 screws that attach the door outer cover.
3. Remove the 8 screws that attache the door inner cover.
4. Remove the plastic cover over the electronic controller.
5. Remove the two connections to the thermal fuse.
6. Remove the thermal fuse.
7. Install the new ... read more

Dishwasher stopped in middle of wash cycle..

  • Customer: David from Bay City TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 25 of 36 people found this instruction helpful
I disasembled the inner door and replaced the door switches with new ones. read more

No power to dishwasher.

  • Customer: Brad from Woodbury MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 22 of 27 people found this instruction helpful
Unplug the dishwasher. Simply removed 8 screws on the inside of the door, removed the interior door panel. Next popped of the plastic protective electrical panel cover. Locate the Thermal fuse that had simple instructions provided. Removed the fuse and replaced the harness. Put everything back together. Plugged dishwasher back into electrical outlet...Dishwa... read more