Models > KHMS1850SSS1 > Instructions

KHMS1850SSS1 KitchenAid Microwave - Instructions

All installation instructions for KHMS1850SSS1 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the KHMS1850SSS1
16-30 of 69
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The 2 molded plastic holes that accept the bolts broke.

  • Customer: CAMERON from WILLIAMSBURG MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 4 people found this instruction helpful
A Phillips screwdriver was all that was needed. A poor design by KitchenAid for only having (2) bolts holding this stainless steel vent grille in a plastic housing, oh well. Don't lean or pull against it to hard or it will most likely break again.

The problem seemed to be in the construction of the grille--too much weight pulling on two screws mounted in plastic. Replacing the part was easy. The question is will it break again since the weak plastic parts have not been strengthened in the replacement grille.

  • Customer: Robert from Cincinnati OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 4 people found this instruction helpful
Mounted the new part and screwed it in.

Microwave grill vent broke off from face of appliance.

  • Customer: CRAIG from ATASCADERO CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
The replacement part was identical to that of the original microwave and arrived in perfect condition.

The repair was extremely simple - too screws and a "snap" and it was done.

Couldn't be happier with the results. Thanks, Part Select!

broken plastic attachment for vent grill cover

  • Customer: judith from holland PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
Replacement of new vent grille took less than 5 minutes. I just wished Kitchen Aid made a product that lasted longer than 3 years. My part arrived very quickly, less than a week. Service was great and so was your price. I had no problem locating a replacement part. Kitchen Aid would not give me the parts number so I did not know if I was order the right part. But you photo really helped to narrow the correct part. Thanks

Broke rotating plate, it fell off counter after being washed

  • Customer: Lois P from Morris IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
Opened door and put new plate in.

Placed order on Thursday evening and received Sat Am

Plastic tabs sheared off screws

  • Customer: NANCY from CHICAGO IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
Removed old screws and pieces of plastic. Replaced new grill vent with old screws. Could not have been any easier

glass turntable broke in half, ring turn needed replaced

  • Customer: Gail from Cincinnati OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
I removed the broken tray and ring-turn and replaced it with the new
Service was fantastic, parts were ordered one day and received the next

The vent bracket broke, that in which in the entire vent needed to be replaced.

  • Customer: Paul from Vero Beach FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
Removed the three screws and replaced the with the new vent.

Grill vent was broken

  • Customer: Rick from Ormond Beach FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 5 people found this instruction helpful
All it took was 2 screws and it was done - could not have been simpler.

cooking tray chipped

  • Customer: Nancy from Henderson NV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
replaced with new one

broken glass tray

  • Customer: Mary from Ocala FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Washed the glass tray and put in the microwave oven. Easy..

"Lost" microwave tray

  • Customer: Amelia from Charleston SC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Took out the turntable parts to ensure I ordered the correct cooking tray. Matching those with photos of related parts on PartSelect worked great. Put turntable drive and support ring in place and cooking tray went in very easily. Plan to order a second one to have on hand for this rental property.

Dropped the glass cooking tray and it broke in half

  • Customer: Emily C from Brandon MS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Looked up the Whirlpool Co. and ordered the part. It was quite simple. Arrived in 2 days and I simply placed it in the microware. It was very very easy!

E. Robinson

Plastic mounting bracket broken heat/stress

  • Customer: Dwight from Los Lunas NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 1 of 2 people found this instruction helpful
Remove two screws, remove grill/bracket, replace grill/bracket, replace two screws and your done. Recycle if You Can.

Plastic bracket that holds screw was broken

  • Customer: Kathleen from Cherry Valley MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
The repair was simple, just unscrew two screws and put the new one on. Took less than five minutes. Easy fix.
All Instructions for the KHMS1850SSS1
16-30 of 69