All Installation Instructions for KitchenAid Microwave KHMS155LSS1

burned out overhead light

Some difficulty getting screw loosened, once that was done replaced burned out bulb.

Parts Used:

Surface Light Bulb

Sharon from Anoka, MN
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

replace door handle

had to go on the internet to find out how to take front door apart..

Parts Used:

Door Handle

Hugh from Potomac Falls, VA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable), Wrench set

Was this instruction helpful to you?

Thank you for voting!

replacement of filters

just replaced the filters

Parts Used:

Grease Filter

Charcoal Air Filters

THEODOROS from VIRGINIA BEACH, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Replace door handle

Taking the door apart was easy once you figured out how it came apart. Youtube videos were not helpful as every brand of microwave is different; what works for one does not work for another. My Kitchenaide has little interior hooks on the inside of the door, 8 on top, 8 on bottom, 4 on the hinge side. You have to pry the door-skin up to get teh hook disengaged, then get a putty knife or similar to keep the hooks from re-engaging. Once you have about 6 or 7 undone, the door starts to come apart. Eventually the exterior of the door comes off; the interior of the door remains hinged. After that, you'll figure it out...

Parts Used:

Door Handle

Carl from Woodridge, IL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Microwave would not heat

Removed microwave case and bad part was right there in plain sight attached to the magatron. Two screws and two wires and part replacement was done. Plugged in microwave and works perfect. Couldn't have been any easier. Thanks for the easy troubleshooting and parts suggestions on your site.

Parts Used:

DIODE

Thermal Fuse

Gary from Chesapeake, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Plastic Door handle broke off

Remove the 3 screws in the door. You will have to pry the door frame apart. use 1 or more flat screwdrivers to pry the inner liner from the medal door. There are plastic pieces that recess into the inner door from the medal frame. Once you get a few loose it is easy to remove the frame. Locate the 2 screws from the handle and attach the new handle. Then reverse the process to put the frame and inner door back together and put the 3 screws back in.

Parts Used:

Door Handle

thomas from orlando, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

rotating glass dish assembly making stange noise

The lady in the Nova Scotia call center should get all the credit for being able to identify the part I needed from only the very limited information I was able to give her. Employee of the month for her. She also had such a great can do attitude. Lawence Baier

Parts Used:

Drive Coupling

Lawrence from Excelsior, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Broke a 15 year old glass cooking tray

Ordered the item on a Monday at 12pm and it arrived the next day. Amazing!

Parts Used:

Glass Cooking Tray

Stephanie from La Jolla, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

glass cooking tray droped and broken

just replace need cooking tray

Parts Used:

Glass Cooking Tray

janice from dunn, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

surface light on microwave wasnt' working

took the light assembly off and replaced the bulb and put the assembly together and fitted back in the space and finished the assembly.

Parts Used:

Surface Light Bulb

Dotty from Hillsboro, WI
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Broken turntable support ring and missing support

Watched video which reminded me to order support for the turntable support ring and did exactly what the person in the video did. Excellent and prompt service and all parts fit.

Parts Used:

Drive Coupling

RING-TURN

Sharon from Pleasanton, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

glass turn table would not turn

After researching online, I found that I needed the turntable drive coupling, part#PS993087. when I went to your site it showed the same part but the part number had changed but said it would fit my microwave. Well, I was really surprised and happy when the part I received 3 days after I placed the order, with normal shipping,fit perfectly and now my turn table in my microwave works. I have marked this site a a favorite and will use it I'm sure soon. Being a single women and having to figure out how to fix the things on a small buget, I'm learning a lot and have a lot of respect for men that know how to do all the repair stuff. Thanks so much, I have been able to mark this off my list of things to fix. Have a nice day. Cj- age, 58

Parts Used:

Drive Coupling