Models > KGRA806PSS02 > Instructions

KGRA806PSS02 KitchenAid Range - Instructions

All installation instructions for KGRA806PSS02 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the KGRA806PSS02
46-51 of 51
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

During the self cleaning, the panel board lights went off and the oven door locked.

  • Customer: Sherrie from Teaneck NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
We unplugged the range and shut off the cable switch. We took off the back panels and found the thermostat behind the bottom panel. I believe my husband had to take the top panel off first in order to get the bottom panel off. We pulled out the two wires that were connected to the thermostat and then took out the thermostat by unscrewing two screws. We installed the new thermostat (two screws) for our model range, re-connected the two wires, plugged it back into the wall and switched on the cable. We were elated when the panel board lid up and seconds later the oven door opened. It works beautifully. Thank you, thank you, Thank you PartSelect and to everyone that wrote their installation instructions that inspired me to try it. It was very easy and we saved hundreds of dollars.

Nylon roller on bottom oven shelf broken off

  • Customer: Larry from Corona CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The nylon roller was very easy to install. Although rather pricey for what the part was, it was shipped immediately and got the job done. Took all of 5 minutes to do. I wish all my repair jobs were that easy.

after self cleaning door locked and control panal went of

  • Customer: Sunny from New York NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
After describing my problem read the review from other people with a same problem. I can't believe it was so easy not mention how much money I saved. It was the thermostat just needed a screw driver to open about dozen screws from the back panel there it was it was thermostat my 12 years old son just unscrew the two screw and pull tthe pin from both side replaced it with a new one and turn the electric on and there it was every thing is back to normal. My son now has the bragging writes for doing this.

Oven Drawer Roller Snapped Off

  • Customer: Kimberly from Sandusky OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Replaced both rollers....Quick and Easy!!

the small burner cap was dropping pieces of grasy finish from around the edge....it wass either overheated from being left on or dropped on the tile floor

  • Customer: Lois from Tower MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
found the model number on the stove, found the numbers incised on the part, found the part on your website, and double-checked by phone before ordering....it is a quality replacement part

replaced burner grate

  • Customer: JOHN from TOMS RIVER NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
BEST service ever Ordered Fri. received Sat. afternoon.Less than 24 hr.
All Instructions for the KGRA806PSS02
46-51 of 51