Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KGCV566RSS01

KGCV566RSS01 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KGCV566RSS01

If you know the cooktop repair part you need, you can browse the list of all parts on the KGCV566RSS01, or you can search by name or part description. You can also find your part by where it is located on the KGCV566RSS01 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.12

Torx Screw

7-18 x 3/4" - sold individually.

$4.52

Knob Skirt - Black

The knob skirt or grommet on your range goes around the knob, forming a buffer between it and the range surface. If your knob skirt is damaged, you should consider replacing it. This product is approximately 2 inches in diameter. This part is made of black plastic, and is sold individually. Many of our customers have described this repair as very easy. To complete the repair, simply remove the burner knob and the old knob skirt, replace it with the new knob skirt and re-attach the burner knob. The product contains four locking tabs that should snap into place easily.

$6.24

SCREW

Sold individually.

$4.79

Screw

Sold individually.

$32.82

Burner Head - 16K - Right Front & Left Front

This part distributes flame evenly to your cookware.

$66.63

Igniter Switches with Harness

This part includes 5 ignition switches and the wire harness. You can not purchase these separately.

$4.94

Screw

$2.90

Screw

This screw is sold individually.

$36.65

Burner Cap - Left Rear/Right Front - Coal Matte Black

$22.59

Burner Head - 6K

This is the Right Rear Burner Head.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

I had a faulty wiring on the igniter switches.

  • Customer: Raymundo from Cerritos, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 9 of 12 people found this instruction helpful
replaced the set of igniter switches I order from Partselect .com. read more

Head burner had something spilled on it which stained it and left a large dark brown spot

  • Customer: Donald from Hudsonville, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 9 people found this instruction helpful
Simply remove two screws take old one off and line up and put new one on and replace the two screws. Couldn't have been easier. read more

Stove top did not come with a gas regulator and nipple attachment

  • Customer: Linda from Colorado Springs, CO
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench (Adjustable)
  • 10 of 38 people found this instruction helpful
A plummer did the repair. read more