Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KGCV566RMT00

KGCV566RMT00 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KGCV566RMT00

If you know the cooktop repair part you need, you can browse the list of all parts on the KGCV566RMT00, or you can search by name or part description. You can also find your part by where it is located on the KGCV566RMT00 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.80

Torx Screw

7-18 x 3/4" - sold individually.

$7.97

Knob Skirt - Black

$4.63

Knob Skirt

This part goes around the back of the knob.

$5.15

SCREW

Sold individually.

$4.79

Screw

Sold individually.

$6.90

Stainless Steel Cleaner

Use this bottle of stainless steel cleaner and polish for any of your stainless steel appliances.

$61.79

Igniter Switches with Harness

This part includes 5 ignition switches and the wire harness. You can not purchase these separately.

$29.20

Gas Valve/Switch Seal Cover

Part is located on top of the igniter switch that's next to the gas valve. Helps regulate gas flow and the amount of normal leakage that may occur.

$32.72

Burner Head - 16K - Right Front & Left Front

This part distributes flame evenly to your cookware.

$4.79

Screw

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

I had a faulty wiring on the igniter switches.

  • Customer: Raymundo from Cerritos, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 9 of 11 people found this instruction helpful
replaced the set of igniter switches I order from Partselect .com. read more

Head burner had something spilled on it which stained it and left a large dark brown spot

  • Customer: Donald from Hudsonville, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 8 people found this instruction helpful
Simply remove two screws take old one off and line up and put new one on and replace the two screws. Couldn't have been easier. read more

the little tabs that hold the skirt in the hole break off

  • Customer: John from Sequim, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
I pulled the knobs off, lifted the broken skirts out and snapped the new ones in. read more