Models > KGCV566MMT01

KGCV566MMT01 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KGCV566MMT01

If you know the cooktop repair part you need, you can browse the list of all parts on the KGCV566MMT01, or you can search by name or part description. You can also find your part by where it is located on the KGCV566MMT01 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Torx Screw

7-18 x 3/4" - sold individually.

$3.83

SCREW

$28.17

Burner Cap - 6000 BTU

$69.52

Pressure Regulator

This valve will automatically cut off the flow of gas when it reaches a certain pressure.

$88.13

Gas Burner Valve - Front/Small

Also known as Burner auxillary shelf valve.

$26.63

Natural Gas to Liquid Propane Conversion Kit

This kit allows you to convert your appliance from natural gas to liquid propane.

$4.46

Screw

$21.63

Burner Head - Large

$87.30

Gas Burner Valve - Rear/Front

$48.66

Burner Cap - 14000 BTU

Sold Individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Knob on range top did not work.

  • Customer: James from Hurst TX
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 1 of 1 people found this instruction helpful
Since removing the burner valve would disable the cooktop, I ordered the valve first. Unfortunately the valve could not be removed because the screw that hold it in place was frozen to the valve and manifold. I finally had to cut the screw off with a hacksaw. Since the screw is a special screw, substitutions did not work, so I had to order the screw and p... read more

Stove top did not come with a gas regulator and nipple attachment

  • Customer: Linda from Colorado Springs CO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench(Adjustable)
  • 9 of 28 people found this instruction helpful
A plummer did the repair. read more

Worn out spring assembly in valve.

  • Customer: Stephen from Ladera Ranch CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set, Wrench set
  • 0 of 0 people found this instruction helpful
This was remove and replace of burner valve on a rangetop stove. Removed front pannel of stove. Removed lower panel support. Removed ignition/spark material/peice (slides right off). Unscrewed valve form underneath through access hole, and unscrewed gas connection on top. Removed and eplaced with new valve and reassembled everything in order. Fairly straight... read more