Models > KGCV465MMT00

KGCV465MMT00 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KGCV465MMT00

If you know the cooktop repair part you need, you can browse the list of all parts on the KGCV465MMT00, or you can search by name or part description. You can also find your part by where it is located on the KGCV465MMT00 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.71

Torx Screw

7-18 x 3/4" - sold individually.

Order within the next 7 hrs and your part ships today!
$2.71

Screw

This screw is sold individually.

$21.57

Burner Cap - 6000 BTU

Sold individually.

$57.67

External Burner Cap

This part attaches to the top of the burner head.

$31.09

Burner Cap - 14000 BTU

Sold Individually.

$37.79

HOLDER-ORF

Order within the next 7 hrs and your part ships today!
$88.41

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$16.33

Burner Head - Small - Right Rear

Auxi 6K

Order within the next 7 hrs and your part ships today!
$4.77

SCREW

Sold individually.

Order within the next 7 hrs and your part ships today!
$28.07

Gas Valve/Switch Seal Cover

Part is located on top of the igniter switch that's next to the gas valve. Helps regulate gas flow and the amount of normal leakage that may occur.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Knob on range top did not work.

  • Customer: James from Hurst, TX
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
  • 2 of 3 people found this instruction helpful
Since removing the burner valve would disable the cooktop, I ordered the valve first. Unfortunately the valve could not be removed because the screw that hold it in place was frozen to the valve and manifold. I finally had to cut the screw off with a hacksaw. Since the screw is a special screw, substitutions did not work, so I had to order the screw and p... read more