Models > KGCS166GSS07 > Instructions

KGCS166GSS07 KitchenAid Cooktop - Instructions

All installation instructions for KGCS166GSS07 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the KGCS166GSS07
1-8 of 8
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the knob was melted by a hot pan

  • Customer: David from Corinth TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 12 of 13 people found this instruction helpful
popped off the old knobs and put on the new ones in less than a minute

I had a faulty wiring on the igniter switches.

  • Customer: Raymundo from Cerritos CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 7 of 9 people found this instruction helpful
replaced the set of igniter switches I order from Partselect .com.

Had melted knob on cooktop

  • Customer: Traci from Bozeman MT
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Went great, part was perfect!

Burner knob appeared to have been accidentally melted by placing a hot pot on top of it.

  • Customer: Jodie from Carlsbad CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
I took the melted knob off, located the part # went online and found this site. I immediately found the correct burner knob, ordered it, and it came very quickly to my home! I just popped it right on the cooktop, and it's as good as new.

control knob was melted from a hot pan

  • Customer: JUDY from AIKEN SC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 4 people found this instruction helpful
Easy as 1 2 3. Removed ruined knob and set new knob on post. That's it. Complete success!

Stove top did not come with a gas regulator and nipple attachment

  • Customer: Linda from Colorado Springs CO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench(Adjustable)
  • 9 of 29 people found this instruction helpful
A plummer did the repair.

change over from Natural Gas to LP and install cooktop from Electric to gas

  • Customer: Dan from Olalla WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
removed old electric cooktop and install gas line and gas cooktop and change from natural gas to LP remove and replace orifice with new ones from kit, my cooktop called for 2 black orifices in the two small burners but did not come in the parts kit that I orded so I used 2 red orifices and it seems to work just fine.

Burner knobs needed replacing due to hot pan melting them

  • Customer: Marvin from Georgetown TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Simiply pulled the old burner knob off and replaced them with the new knobs.
All Instructions for the KGCS166GSS07
1-8 of 8