Models > KGCS105GSS3

KGCS105GSS3 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KGCS105GSS3

If you know the cooktop repair part you need, you can browse the list of all parts on the KGCS105GSS3, or you can search by name or part description. You can also find your part by where it is located on the KGCS105GSS3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.91

Surface Burner Knob

$2.70

Torx Screw

7-18 x 3/4" - sold individually.

$4.11

SCREW

$3.96

Control Knob

Sold Individually. This white knob accepts a D-shaped shaft.

$24.34

Knob Bezel - Black

Must order knob separately by Model#.

$4.46

Screw

$69.52

Pressure Regulator

This valve will automatically cut off the flow of gas when it reaches a certain pressure.

$88.46

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$21.63

Burner Head - Large

$26.63

Natural Gas to Liquid Propane Conversion Kit

This kit allows you to convert your appliance from natural gas to liquid propane.

Common Symptoms of the KGCS105GSS3 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the knob was melted by a hot pan

  • Customer: David from Corinth TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 12 of 13 people found this instruction helpful
popped off the old knobs and put on the new ones in less than a minute read more

Top burners would not light. No "clicking" .

  • Customer: Carolyn from Bellingham MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 10 of 12 people found this instruction helpful
My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great! read more

gas burners would not automatically light when gas turned on

  • Customer: MICHAEL from LONGVIEW TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 4 of 5 people found this instruction helpful
I went online and discovered the repair method and schematic of the range. I removed the spark module after first removing the upper rear panel cover and replaced with the new part module ordered from your company and now the spark module operates all the gas elements when they are turned on thus lighting the gas burners. My mother in law was thrilled, as sh... read more