Models > KGCS105GSS2 > Instructions

KGCS105GSS2 KitchenAid Cooktop - Instructions

All installation instructions for KGCS105GSS2 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the KGCS105GSS2
1-15 of 16
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the knob was melted by a hot pan

  • Customer: David from Corinth TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 12 of 13 people found this instruction helpful
popped off the old knobs and put on the new ones in less than a minute

Stove is over 50 years old, all knobs were broken or worn

  • Customer: CAROL from ORANGE CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 15 people found this instruction helpful
Went to a local appliance parts store and could find only black knobs--there were two kinds--one $3 each, the other $8 each. Both kinds looked AWFUL so I went on line and found partselect.com which had suitable knobs at a very reasonable price, ordered them and they were shipped the next day. Who could ask for anything more? The service was terrific.

worn out grate pads

  • Customer: Vivian from Irvine CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 5 people found this instruction helpful
simply removed the old worn out pad and replaced it with the new ones.

Knob on range top did not work.

  • Customer: James from Hurst TX
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 1 of 1 people found this instruction helpful
Since removing the burner valve would disable the cooktop, I ordered the valve first. Unfortunately the valve could not be removed because the screw that hold it in place was frozen to the valve and manifold. I finally had to cut the screw off with a hacksaw. Since the screw is a special screw, substitutions did not work, so I had to order the screw and pay shipping a second time. These screws should be included with the valve. Anyway, the hacksaw did some slight damage to the manifold so that the screw did not seal off properly. I had to use a Dremel tool to smooth the surface and then use fiberglass to coat the surface to seal any scratches or potential leaks. I screwed the screw in after applying the fiberglass resin to the manifold surface while the resin was still pliable. This seemed to seal the manifold off so that there is no leak, but it does make me nervous. Because of having to reorder for the additional part, the range top took almost a week to repair and could not be used during that time all because the screw was not included with the burner valve. Also a screw with a larger head would have allowed a larger wrench to be used and the screw could have been removed easily. The screw head was so small that it rounded off from the wrench making it more difficult to remove.

Burner knob appeared to have been accidentally melted by placing a hot pot on top of it.

  • Customer: Jodie from Carlsbad CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
I took the melted knob off, located the part # went online and found this site. I immediately found the correct burner knob, ordered it, and it came very quickly to my home! I just popped it right on the cooktop, and it's as good as new.

Had melted knob on cooktop

  • Customer: Traci from Bozeman MT
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Went great, part was perfect!

Gas knobs on the cooktop had been melted by a hot frying pan placed on them by mistake.

  • Customer: Donald from San Antonio TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Ordered new knobs from PartSelect. I ordered the wrong part. The young lady I spoke to not only quickly arranged for a return and refund but offered to order the correct parts which were received and now the stove looks like new.

The burner grate pads were worn out and my stove top was getting scratched.

  • Customer: Coralee from Snohomish WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 3 people found this instruction helpful
Removed what was left of the old burner grate pads and put in the new ones. They are incredibly hard to impossible to find in local stores. Thank goodness for PartSelect.com!!!!

control knob was melted from a hot pan

  • Customer: JUDY from AIKEN SC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 4 people found this instruction helpful
Easy as 1 2 3. Removed ruined knob and set new knob on post. That's it. Complete success!

Stove top did not come with a gas regulator and nipple attachment

  • Customer: Linda from Colorado Springs CO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench(Adjustable)
  • 9 of 28 people found this instruction helpful
A plummer did the repair.

Grate Pads broke off

  • Customer: Jerry from Midland TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
After the pad broke off, the stem that holds it in place had to be drilled out. Instructions said to reinstall new pads with ATV to hold them in place. Note original pads were .125" thick while replacements were only .040" causing the grate to set on the burner, not the pads.The fix was to only partialy install the new pads and fill the gap with ATV. I reinstalled the grates after the 24 hour cure period, and so far its holding up. Note the pads are not on the drawing on the internet site. but the service rep was able the recommend the part number that I used.

lost gas top knobs

  • Customer: Bonnie from Collegeville PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
just put them on and pressed down

Worn out spring assembly in valve.

  • Customer: Stephen from Ladera Ranch CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set, Wrench set
  • 0 of 0 people found this instruction helpful
This was remove and replace of burner valve on a rangetop stove. Removed front pannel of stove. Removed lower panel support. Removed ignition/spark material/peice (slides right off). Unscrewed valve form underneath through access hole, and unscrewed gas connection on top. Removed and eplaced with new valve and reassembled everything in order. Fairly straight forward.

rubber protectors on gas burner grates had worn away

  • Customer: Karen from Whispering Pines NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed the old rubber protectors/pads with a cake tester, new pads inserted beautifully into grates. Now my pans sit level on the grates again. Yeah!

change over from Natural Gas to LP and install cooktop from Electric to gas

  • Customer: Dan from Olalla WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
removed old electric cooktop and install gas line and gas cooktop and change from natural gas to LP remove and replace orifice with new ones from kit, my cooktop called for 2 black orifices in the two small burners but did not come in the parts kit that I orded so I used 2 red orifices and it seems to work just fine.
All Instructions for the KGCS105GSS2
1-15 of 16