Models > KGCP463KSS03

KGCP463KSS03 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KGCP463KSS03

If you know the cooktop repair part you need, you can browse the list of all parts on the KGCP463KSS03, or you can search by name or part description. You can also find your part by where it is located on the KGCP463KSS03 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Torx Screw

7-18 x 3/4" - sold individually.

$2.70

Screw

This screw is sold individually.

$2.70

Ground Screw

Sold Individually.

$2.70

SCREW

$28.17

Burner Cap - 6000 BTU

$2.70

Hex Nut

Part may differ in appearance, but functions same as original.

$70.13

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$4.45

Thermostat Bulb Clip

$3.83

SCREW

$3.76

Control Knob

Sold individually. This knob accepts a D-shaped shaft.

Common Symptoms of the KGCP463KSS03 [Viewing 1 of 38]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Top burners would not light. No "clicking" .

  • Customer: Carolyn from Bellingham MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 11 of 14 people found this instruction helpful
My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great! read more

gas burners would not automatically light when gas turned on

  • Customer: MICHAEL from LONGVIEW TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
I went online and discovered the repair method and schematic of the range. I removed the spark module after first removing the upper rear panel cover and replaced with the new part module ordered from your company and now the spark module operates all the gas elements when they are turned on thus lighting the gas burners. My mother in law was thrilled, as sh... read more

Spark Module malfunction, won't spark

  • Customer: Darrel from Kewaunee WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 7 people found this instruction helpful
Removed back upper cover, unscrewed retaining screw from module. As noted in a comment from another do-it-yourselfer, I replaced screw with a longer one and reinstalled module. Note that the replacement part is not exactly the same as the old one(the wires are located differently), I noted the wire color codes with the slot number and reinstalled them in t... read more